Skroutz.cy

ImL Cala Pool Water Pump Hydromassage Three-Phase with Power 4hp
Pool Water Pumps

ImL Cala Pool Water Pump Hydromassage Three-Phase with Power 4hp

Water pump for swimming pool without pre-filter IML CALA, suitable for private and commercial installations, with the following technical specifications:

  • Specially designed for counter current...

Water pump for swimming pool without pre-filter IML CALA, suitable for private and commercial installations, with the following technical specifications:

  • Specially designed for counter current swimming and water massage systems without pre-filter
  • Type: CENTRIFUGAL
  • Pump body made of fiberglass-reinforced polypropylene for chemical resistance
  • Diffuser and...
See full description See full description

  • Item

    Hydromassage

    Pump that circulates the water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles placed on the walls or the bottom of the pool) to create the hydromassage effect.

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Professional / Olympic (over 140 m³)

  • Power Supply

    Three-Phase

    Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.

  • Speed

    Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.
  • See all
752 68 €
753 Coins 753 Coins
Delivery Tue, 14 Jul - Thu, 16 Jul
28,00 € shipping cost
Delivery Wed, 22 Jul - Fri, 24 Jul
23,00 € shipping cost
Do you want it with 23,00 € shipping?
Sent from Greece
From E-ecopool 4.8 (23)
4.8 (23 reviews)
Greece
1 piece
See Swimming Pool Equipment on the page of E-ecopool
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Water pump for swimming pool without pre-filter IML CALA, suitable for private and commercial installations, with the following technical specifications:

  • Specially designed for counter current swimming and water massage systems without pre-filter
  • Type: CENTRIFUGAL
  • Pump body made of fiberglass-reinforced polypropylene for chemical resistance
  • Diffuser and impeller made of NORYL
  • SHAFT INOX 316L
  • Sealing made of ceramic and graphite
  • Electric motor: 2850rpm, 230V or 230V/400V-50Hz
  • Low noise
  • Includes connection fittings for the circulation network
  • Connection to D63

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Hydromassage

Type

Hydromassage

Pump that circulates the water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles placed on the walls or the bottom of the pool) to create the hydromassage effect.
Power (hp)
4 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Three-Phase

Power Source

Three-Phase

Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Professional / Olympic (over 140 m³)
Filter Included
No

Performance

Speed
2850 rpm

Speed

Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.

Installation

Connection Nozzle
63 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Water pump for swimming pool without pre-filter IML CALA, suitable for private and commercial installations, with the following technical specifications:

  • Specially designed for counter current swimming and water massage systems without pre-filter
  • Type: CENTRIFUGAL
  • Pump body made of fiberglass-reinforced polypropylene for chemical resistance
  • Diffuser and impeller made of NORYL
  • SHAFT INOX 316L
  • Sealing made of ceramic and graphite
  • Electric motor: 2850rpm, 230V or 230V/400V-50Hz
  • Low noise
  • Includes connection fittings for the circulation network
  • Connection to D63

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Hydromassage

Type

Hydromassage

Pump that circulates the water in the spa or jacuzzi system, sending it under pressure to the jets (special nozzles placed on the walls or the bottom of the pool) to create the hydromassage effect.
Power (hp)
4 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Three-Phase

Power Source

Three-Phase

Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Professional / Olympic (over 140 m³)
Filter Included
No

Performance

Speed
2850 rpm

Speed

Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.

Installation

Connection Nozzle
63 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

752,68 €
28,00 € 33,00 €   shipping cost