Skroutz.cy

GBC Smart Switch Dimmer Wi-Fi & RF 1.5A 68681068
Intermediate Switches

GBC Smart Switch Dimmer Wi-Fi & RF 1.5A 68681068 Code: 68681068

The GBC HeyTriac dimmer module adjusts 230 V lighting from 0% to 100% and turns a conventional light switch into a smart control. It can be controlled via Wi-Fi using the HeySmart app or with a wired...

The GBC HeyTriac dimmer module adjusts 230 V lighting from 0% to 100% and turns a conventional light switch into a smart control. It can be controlled via Wi-Fi using the HeySmart app or with a wired push button, and also supports RF control. The TRIAC mode can be set to Leading Edge or Trailing Edge, depending on the light fixture.

It supports schedules and...

See full description See full description

Top specs

  • Connectivity

    RF

    Wireless control via radio frequencies.

    Wi-Fi

    The most common connectivity option for individual switches, as it connects directly to the router.

  • Usage

    Lighting

    For remote control of lamps and lighting fixtures.

  • Maximum Load

    It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

    For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.

  • Dimmer

    It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
  • Dimensions 52x52x25mm
  • See all
32 99 €
Delivery by Fri, 06 Nov
Free   shipping cost
From MS Electronics 5.0 (3)
5.0 (3 reviews)
Αγ. Αθανάσιος, Λεμεσού
2 pieces
See Sockets & Switches on the page of MS Electronics

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The GBC HeyTriac dimmer module adjusts 230 V lighting from 0% to 100% and turns a conventional light switch into a smart control. It can be controlled via Wi-Fi using the HeySmart app or with a wired push button, and also supports RF control. The TRIAC mode can be set to Leading Edge or Trailing Edge, depending on the light fixture.

It supports schedules and group control with other HeyTriac modules, as well as voice control via Google Home and Amazon Alexa. It fits in a recessed 503 box and can operate without Wi-Fi using a wired push button or optional RF remote control.

  • Type: Smart dimmer
  • Use: 230 V lighting
  • Connectivity: Wi-Fi and RF
  • Control: HeySmart app, wired push button, and RF remote control
  • Voice control: Google Home and Amazon Alexa
  • Brightness adjustment: 0%–100%
  • Dimmer type: TRIAC Leading Edge or Trailing Edge
  • Maximum load: 1.5 A / 300 W
  • Input voltage: 100–250 V AC
  • Output voltage: 100–250 V AC
  • Frequency: 2.4 GHz and RF
  • Protection rating: IP20
  • Installation: In a recessed 503 box
  • Dimensions: 52 × 52 × 25 mm
  • Weight: 60 g
  • Quantity: 1

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
68681068

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.
Dimensions (Spec Summary)
52x52x25mm

Smart Attributes

Connectivity
RF, Wi-Fi

Connectivity

RF

Wireless control via radio frequencies.

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
1.5 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
Yes

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The GBC HeyTriac dimmer module adjusts 230 V lighting from 0% to 100% and turns a conventional light switch into a smart control. It can be controlled via Wi-Fi using the HeySmart app or with a wired push button, and also supports RF control. The TRIAC mode can be set to Leading Edge or Trailing Edge, depending on the light fixture.

It supports schedules and group control with other HeyTriac modules, as well as voice control via Google Home and Amazon Alexa. It fits in a recessed 503 box and can operate without Wi-Fi using a wired push button or optional RF remote control.

  • Type: Smart dimmer
  • Use: 230 V lighting
  • Connectivity: Wi-Fi and RF
  • Control: HeySmart app, wired push button, and RF remote control
  • Voice control: Google Home and Amazon Alexa
  • Brightness adjustment: 0%–100%
  • Dimmer type: TRIAC Leading Edge or Trailing Edge
  • Maximum load: 1.5 A / 300 W
  • Input voltage: 100–250 V AC
  • Output voltage: 100–250 V AC
  • Frequency: 2.4 GHz and RF
  • Protection rating: IP20
  • Installation: In a recessed 503 box
  • Dimensions: 52 × 52 × 25 mm
  • Weight: 60 g
  • Quantity: 1

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
68681068

Specifications

Switch Type
Smart Switch
Usage
Lighting

Usage

Lighting

For remote control of lamps and lighting fixtures.
Dimensions (Spec Summary)
52x52x25mm

Smart Attributes

Connectivity
RF, Wi-Fi

Connectivity

RF

Wireless control via radio frequencies.

Wi-Fi

The most common connectivity option for individual switches, as it connects directly to the router.

Additional Features

With Remote Control
No

With Remote Control

It allows you to control the switch remotely with a remote control, without needing your smartphone.
Maximum Load
1.5 A

Maximum Load

It is the maximum amount of current that the switch can withstand without burning out. It shows you how many or how powerful devices you can connect: for simple lights, 10A is enough, while for power-hungry devices (such as a water heater) more Amperes are required.

For example, a typical LED bulb (e.g. 10W) draws very little current, about 0.04 Amperes. This means that a standard smart switch of 10A is more than sufficient for its operation.
Pieces
1

Features

Dimmer
Yes

Dimmer

It allows you to adjust the brightness of the lighting instead of simple on/off operation. Bulbs that support dimmable function are required.
Dry Contact
No

Dry Contact

Dry Contact. It gives you the ability to safely control devices that have their own power supply. It does not transfer current but allows you to control them remotely, without causing a short circuit or damage.
Consumption Measurement
No

Consumption Measurement

It allows you to see in real time how much electricity your connected device is consuming and to keep a usage history, through your smartphone and the compatible app.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

32,99 €
Free   shipping cost