Wynn's Airco Fresh - A/C Treatment is a highly effective cleaner based on water-soluble surfactants for air conditioning systems, packaged in a spray bottle.
Properties:
- cleans the surface of the air conditioner's evaporator
- removes unpleasant odors and prevents their occurrence
- can prevent allergic reactions: sneezing, colds, coughing, sore throat, eye irritations, etc.
- non-flammable and consists of non-toxic, non-irritating, and non-oxidizing substances
- can be sprayed in any position (even with the nozzle facing down)
- contains clean air in the form of propellant gas
Applications:
- for all car, truck, and recreational boat air conditioning systems, with or without a pollen filter
- not to be used as a room fragrance
Instructions for use:
- First method: Through the engine
- Remove the pollen filter or cabin filter, usually located on the passenger side, if present.
- Adjust the air flow to flow only from the central dashboard outlet.
- Manual A/C setting:
- Turn off the air conditioning and set the temperature to low.
- Set to 'outside air' and increase the speed to maximum.
- Automated A/C setting:
- Set to ECO mode if possible, or turn off the A/C, then set the temperature to minimum.
- Set to 'outside air' and increase the speed to maximum.
- Continue as follows:
- Shake the Wynn's Airco Fresh - A/C Treatment spray well before use.
- Shake the can well and spray the solution into the A/C intake duct (usually located in the engine compartment on the passenger side) for 3 minutes with 3-second breaks under high pressure.
- Applying the solution through the air vents inside the vehicle:
- Set the air flow to the vents in the middle of the dashboard.
- Manual A/C system: Turn off the A/C, set the discharge temperature to low, set the discharge speed to maximum, set the ventilation system to RECIRCULATION.
- Automated A/C system: Set to ECO or turn off the A/C, but with the minimum possible temperature. Find the point where the air enters most strongly (usually in the foot vent) and spray for 1 minute.
- Turn off the air conditioning system and wait 10 minutes before turning the air conditioning system back on.
Technical specifications:
- Appearance: Clear green liquid
- Density at 15°C: 1.0027 kg/dm³
- pH value: 8.0
- Propellant gas: Clean air
- Content: 250 ml
Specifications
- Type
- Spray
Quantity
- Capacity
- 250 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.