Structural Adhesives

Isomat Ak Thermo Reinforced Resin Adhesive for Thermal Insulation Boards

The fiber-reinforced, resin-modified, cement-based Isomat AK Thermo adhesive is designed for bonding polystyrene, mineral wool, polyurethane and cork insulation boards to the exterior façades of...

The fiber-reinforced, resin-modified, cement-based Isomat AK Thermo adhesive is designed for bonding polystyrene, mineral wool, polyurethane and cork insulation boards to the exterior façades of buildings. It offers zero slip and an open time of at least 20 minutes. When used with embedded fiberglass mesh, it also serves as a reinforced render coat over the...

See Description & Specifications See Description & Specifications
21 00 €
Delivery Thursday, 26 November
4,50 € shipping cost
Sent from Greece
From Nikolopoulos-bagno 4.7 (57)
What if I want to return it?

You can return it for free within 14 days. We will come to your place, return it for free, and you will get your money back.

Learn more about invoicing
Questions

Description & Specifications

The fiber-reinforced, resin-modified, cement-based Isomat AK Thermo adhesive is designed for bonding polystyrene, mineral wool, polyurethane and cork insulation boards to the exterior façades of buildings. It offers zero slip and an open time of at least 20 minutes. When used with embedded fiberglass mesh, it also serves as a reinforced render coat over the boards, creating a substrate for plaster.

It is classified as GP CS IV, W2 mortar according to EN 998-1 and as C2 E adhesive according to EN 12004. It has a reaction to fire rating of A1 and a thermal conductivity λ10 of 0.43 W/(m·K).

  • Type: Fiber-reinforced, resin-modified, cement-based adhesive
  • Application: Bonding and coating insulation boards on exterior façades
  • Board materials: Polystyrene, mineral wool, polyurethane and cork
  • Slip: Zero
  • Open time: At least 20 min
  • Mortar classification: GP CS IV, W2 according to EN 998-1
  • Adhesive classification: C2 E according to EN 12004
  • Reaction to fire: A1
  • Thermal conductivity λ10: 0.43 W/(m·K)
  • Consumption as an adhesive: 2.0–4.0 kg/m²
  • Consumption as reinforced mortar: Approximately 1.5 kg/m² per mm
  • Weight: 1.5 kg

Manufacturer

Type
Thermal Insulation Plates
Quantity
1.5 kg
Colour
White

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

21,00 €
4,50 €   shipping cost