High-temperature paint based on special silicone resins, ideal for surfaces and constructions made of metal or concrete exposed to intense heat.

Easy application with a roller, brush, or spray gun. Ready to use, requires dilution only when applying with a spray gun. Resistance size for non-continuous heat is 800°C.

• Drying Time:
• 1st Coat (20°C): 1-2 hours
• Complete Drying (20°C): 24 hours

Fields of Application: Hot gas pipes, chimneys, fireplaces, stoves, barbecues, grills, exhaust systems, etc.

Coverage: 12-16 m²/l depending on the surface.

With a satin finish.

Application Recommendations:

• Application temperature between 5 to 35°C.
• Clean the surface from grease, silicones, old paints, or dirt and rust residues. Sand and remove dust.
• Apply the product evenly with a brush or spray gun. Allow to dry for 1-2 hours.
• There's no need to sand if you apply the second coat within 24 hours of the first.
• If sanding is required, use sandpaper 180-220 and then apply the second coat.
• Before use, apply controlled heat (250 °C) for at least 1 hour for maximum resistance.
• Drying at room temperature in 24 hours.

Manufacturer: Borma Wachs