Ultra-white final layer plaster "marble" applied over the basic plaster layer INTOMAP BASE. Thanks to the special additives it contains, it is characterized by high water repellency, making it suitable for applications in coastal or mountainous areas and generally where greater protection from moisture is required.

Technical Data:

• Mixing ratio: approximately 20 liters of water per 100 kg of powder (approximately 5.00 liters per 25 kg bag)
• Mixture lifespan: approximately 30 minutes (+20°C)
• Maximum application thickness: 5 mm
• Classification: EN998-1 GP CSII/Wc2
• Storage: 12 months
• Color: white
• Application: trowel/plaster machine
• Consumption: Approximately 7 kg/m2 for a thickness of 5 mm
• Packaging: 25kg bags

Recommendations:

• Do not use Intomap Finish WR at a thickness greater than 5mm.
• Do not apply Intomap Finish WR if temperatures are lower than +5°C or higher than +35°C.
• Do not apply Intomap Finish WR if the basic plaster layer Intomap Base has not fully cured.
• Do not add cement, lime, or aggregates to Intomap Finish WR.
• Do not apply Intomap Finish WR on painted surfaces.
• Do not use Intomap Finish WR on gypsum or anhydrite surfaces unless Primer G has been applied beforehand.
• Do not remix or add water to a mixture that has begun to set in the container.
• Application of Intomap Finish WR on thermal insulation boards is not recommended.
• Use the Certified external thermal insulation systems Mapetherm System by Mapei based on the Mapetherm AR1 product.
• Do not apply Intomap Finish WR on thermal insulating bricks or blocks, as well as on aerated concrete or lightweight concrete elements.
• Do not use Intomap Finish WR in strong winds or if surfaces are exposed to strong sunlight.