Skroutz.cy

Vevor Single-phase Pump Well 0.73hp SJQSB1100W403CHOEV2
Submersible Water Pumps

Vevor Single-phase Pump Well 0.73hp SJQSB1100W403CHOEV2

High flow, high lift: This submersible deep well pump provides 1100W input power and 550W output power, offering excellent flow and lift capabilities. With a maximum lift of 279 feet (85 m) and a flow...

High flow, high lift: This submersible deep well pump provides 1100W input power and 550W output power, offering excellent flow and lift capabilities. With a maximum lift of 279 feet (85 m) and a flow rate of up to 65 L/min, it covers a wide range of water supply needs.

With external control box: This deep well pump comes with an external control box for...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    85

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
183 72 €
184 Coins 184 Coins
Delivery Fri, 11 Sep - Thu, 17 Sep
37,00 € shipping cost
Do you want it with 32,00 € shipping?
Sent from Greece
From Bluestore 5.0 (23)
5.0 (23 reviews)
Greece
20+ pieces
See Water Pumps on the page of Bluestore
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

High flow, high lift: This submersible deep well pump provides 1100W input power and 550W output power, offering excellent flow and lift capabilities. With a maximum lift of 279 feet (85 m) and a flow rate of up to 65 L/min, it covers a wide range of water supply needs.

With external control box: This deep well pump comes with an external control box for easy operation and maintenance. Featuring a copper motor, it provides strong, stable water flow, ensuring reliable performance for all your water needs.

Capable pure copper motor: Equipped with a copper wire motor, this submersible deep well water pump provides strong and stable water flow. The motor is designed with overheating protection, ensuring optimal performance for reliable, long-term operation.

Built to last, corrosion-resistant: Designed for durability, our submersible deep well pump features an IP68 waterproof rating and is constructed with a stainless steel connector and filter mesh. This corrosion-resistant construction resists rust and keeps debris out, effectively protecting the motor.

Ideal for any water source: Our deep well pump is built to handle a variety of water sources, making it ideal for agricultural irrigation, animal watering, household water supply, river mining, and pond maintenance.

  • Product Model Number: 4SDM2/12
  • Voltage Frequency: AC 230V 50Hz
  • Output Power: 550W
  • Input Power: 1100W
  • Max. Flow: 65 L/min
  • Max. Head: 278.87 feet / 85 m
  • Discharge Size: G1.25"
  • Control Mode: External
  • Product Dimensions: 34.25 x 4.02 x 4.02 inches / 870 x 102.4 x 102.4 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
85 m

Maximum Head Height: 85


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
85 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

High flow, high lift: This submersible deep well pump provides 1100W input power and 550W output power, offering excellent flow and lift capabilities. With a maximum lift of 279 feet (85 m) and a flow rate of up to 65 L/min, it covers a wide range of water supply needs.

With external control box: This deep well pump comes with an external control box for easy operation and maintenance. Featuring a copper motor, it provides strong, stable water flow, ensuring reliable performance for all your water needs.

Capable pure copper motor: Equipped with a copper wire motor, this submersible deep well water pump provides strong and stable water flow. The motor is designed with overheating protection, ensuring optimal performance for reliable, long-term operation.

Built to last, corrosion-resistant: Designed for durability, our submersible deep well pump features an IP68 waterproof rating and is constructed with a stainless steel connector and filter mesh. This corrosion-resistant construction resists rust and keeps debris out, effectively protecting the motor.

Ideal for any water source: Our deep well pump is built to handle a variety of water sources, making it ideal for agricultural irrigation, animal watering, household water supply, river mining, and pond maintenance.

  • Product Model Number: 4SDM2/12
  • Voltage Frequency: AC 230V 50Hz
  • Output Power: 550W
  • Input Power: 1100W
  • Max. Flow: 65 L/min
  • Max. Head: 278.87 feet / 85 m
  • Discharge Size: G1.25"
  • Control Mode: External
  • Product Dimensions: 34.25 x 4.02 x 4.02 inches / 870 x 102.4 x 102.4 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
85 m

Maximum Head Height: 85


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
85 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

183,72 €
37,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more