The AMILA Splash Slim Olympic-type plate series is made from high-quality 100% primary rubber of regular purity combined with steel. The allowable weight variation is +/-1%, meaning for a weight of 20Kg, the acceptable variation reaches 200gr.

Rubber Hardness: The Shore Durometer is one of the measurements we can perform on the rubber. A high measurement (i.e., high hardness) means less bounce on drops. Major companies in the competition range between 78 and 88 measurement units. The rubber used in AMILA products even exceeds the maximum values of the competition, demonstrating the high standards of our choices.

A-Plates Slim Edition: The AMILA Splash series belongs to a category of Bumpers called A-Plates. This category is made from a special rubber blend. The surface layer is softer, offering greater floor protection and noise reduction, while the inner layer is harder for increased durability. In the core of the plate (from 10Kg and above), a piece of steel has been added to reduce the thickness of the plate without reducing its lifespan or bounce capability. This way, you can load more weight on press machines or bars.

Plate Design: All plates have the same diameter (Ø45cm) at all weights. The only difference is the thickness. The rubber color is black, while the AMILA logo and the weights are embossed in white, making them distinguishable. The colorful "Splashes" or "Splatters," as they have become known, also play a leading role, colored differently depending on the weight, aiding in color coding. Specifically, as with other AMILA Bumper plates that feature color, the correspondence is as follows:

• 15Kg Grey
• 10Kg Green
• 15Kg Yellow
• 20Kg Blue
• 25Kg Red

Weight (Kg): 25.00 | Ring Diameter (mm): 50 | Plate Material: 100% Primary Rubber Combined with Steel | Ring Material: Stainless Steel | Color: Speckled Black with Red | Plate Diameter (cm): 45 | Plate Thickness (mm): 72 | Series: Splash Bumper