Skroutz.cy

Ruris Rmx1360 – Cordless Brushless Hammer Drill Driver 60 Nm Battery Charger Included
Power Drill Drivers & Screwdrivers

Ruris Rmx1360 – Cordless Brushless Hammer Drill Driver 60 Nm Battery Charger Included

Key features:

  • Solo (without battery, charger)
  • Maximum torque: 60 Nm
  • Maximum Impact Rate: 30000bpm
  • Maximum Motor Speed: 2000rpm
See full description

Top specs

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
  • Number of Batteries 1

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1

    It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

  • Impact

    The impact function provides high power to easily and quickly complete even the most demanding tasks.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

At a glance

The drill driver from the company Ruris operates with a 20 Volt battery (the battery and charger are not included). It is suitable for both screwing - unscrewing, as well as for drilling holes in wood, metal, and various other construction materials.
It stands out for its impact capability, which offers high power to easily and quickly complete even the most demanding tasks. It has the ability to adjust the rotation speed and operating torque, so it can be set according to the task you want to perform. Usually, low values are needed for screwing - unscrewing and higher ones for drilling into walls or concrete. Its chuck can accommodate drill bits with a base diameter of up to 13 millimeters.

Features & Functions


  • Main functions: Drilling / Impact Drilling / Screwing & Unscrewing
  • Additional functions: rotation direction switch button and battery charge level indicator

Specifications

  • Brushless motor
  • Number of speeds: 2
  • Speed RPM: 0-450 / 0-2000
  • Torque steps: 20
  • Maximum torque: 60 nm
  • Impact power: 30000
  • Shaft made of metal with quick tightening
  • Chuck opening diameter: 0-13mm
  • Maximum drilling diameter: 10mm
  • Maximum screw diameter: 10mm
  • Weight: 1.0 kg

Includes

  • 5 screwdriver bits
  • 7 wood bits (3-10mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
1
Battery Voltage
20 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Features & Functions

Maximum Motor Speed
2000 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
60 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
30000 bpm
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

At a glance

The drill driver from the company Ruris operates with a 20 Volt battery (the battery and charger are not included). It is suitable for both screwing - unscrewing, as well as for drilling holes in wood, metal, and various other construction materials.
It stands out for its impact capability, which offers high power to easily and quickly complete even the most demanding tasks. It has the ability to adjust the rotation speed and operating torque, so it can be set according to the task you want to perform. Usually, low values are needed for screwing - unscrewing and higher ones for drilling into walls or concrete. Its chuck can accommodate drill bits with a base diameter of up to 13 millimeters.

Features & Functions


  • Main functions: Drilling / Impact Drilling / Screwing & Unscrewing
  • Additional functions: rotation direction switch button and battery charge level indicator

Specifications

  • Brushless motor
  • Number of speeds: 2
  • Speed RPM: 0-450 / 0-2000
  • Torque steps: 20
  • Maximum torque: 60 nm
  • Impact power: 30000
  • Shaft made of metal with quick tightening
  • Chuck opening diameter: 0-13mm
  • Maximum drilling diameter: 10mm
  • Maximum screw diameter: 10mm
  • Weight: 1.0 kg

Includes

  • 5 screwdriver bits
  • 7 wood bits (3-10mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
1
Battery Voltage
20 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

Features & Functions

Maximum Motor Speed
2000 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
60 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
30000 bpm
Torque Adjustment
No

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
Yes

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.