Skroutz.cy

Special Paint & Additives

Enamel Borma Color Silver 375ml 6951

Borma Color 6951 enamel is a high-temperature coating based on special silicone resins, for metal surfaces and cement structures exposed to intense heat. It withstands intermittent heat up to 800 °C...

Borma Color 6951 enamel is a high-temperature coating based on special silicone resins, for metal surfaces and cement structures exposed to intense heat. It withstands intermittent heat up to 800 °C and leaves a satin silver finish. Apply with a roller, brush or spray gun.

Ready to use; thinning is required only for spray-gun application. Suitable for...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Questions
Review the product
Product report

Description & Specifications

Borma Color 6951 enamel is a high-temperature coating based on special silicone resins, for metal surfaces and cement structures exposed to intense heat. It withstands intermittent heat up to 800 °C and leaves a satin silver finish. Apply with a roller, brush or spray gun.

Ready to use; thinning is required only for spray-gun application. Suitable for hot-gas pipes, chimneys, fireplaces, stoves, barbecues, grills and exhausts. Before application, remove grease, silicone, old paint, dirt and rust from the surface, then sand and dust it off. To achieve maximum resistance, the product must be heat-cured at a controlled temperature of 250 °C for at least 1 hour before use.

  • Type: Enamel
  • Colour: Silver
  • Finish: Satin
  • Composition: Special silicone resins
  • Heat resistance: Up to 800 °C, intermittent
  • Application: Roller, brush or spray gun
  • Thinning: Only for spray-gun application
  • First-coat drying time: 1–2 hours at 20 °C
  • Full drying time: 24 hours at 20 °C
  • Coverage: 12–16 m²/L, depending on the surface
  • Application temperature: 5–35 °C
  • Recoating: No sanding is required if the second coat is applied within 24 hours of the first
  • Preparation before use: Controlled heating at 250 °C for at least 1 hour
  • Volume: 375 ml

Manufacturer

OEM

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Enamel
Colour
Silver
Acrilyc
No
Luminosity
Satine

Quantity

Volume
0.375 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

13,44 €
4,50 €   shipping cost