Vitex Lussolac polyurethane impregnating varnish protects indoor and outdoor wooden surfaces. Its solvent-based formula contains UV filters to protect the wood from ultraviolet rays and provides resistance to moisture and sunlight.
Before application, the wooden surface must be clean, dry, free of resin or oil, and sanded. Apply with a roller, brush, or spray gun. A second coat can be applied after 20–24 hours.
- Type: Impregnating varnish
- Suitable surface: Wood
- Colour: Pine
- Finish: Matt
- Composition: Polyurethane
- Thinning: Solvent-based; up to 3% with T300 or T350 thinner
- Components: 1
- Use: Indoor and outdoor
- Protection: Against moisture, sunlight, and ultraviolet rays
- Flexibility and hardness: High
- Application: With a roller, brush, or spray gun
- Touch-dry time: 3–4 hours
- Recoating time: 20–24 hours
- Coverage: 12–16 m²/L per coat; 6–8 m²/L for two coats
- Application temperature: 5–35 °C
- Relative humidity during application: Below 80%
- Wood moisture content: Up to 18%
- Cleaning rollers and brushes: With T300 thinner, then with soap or detergent
- Cleaning spray guns: With T350 thinner
- Quantity: 750 ml
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Matte
- Insecticide / Antifungal
- No
- Diluting Agent
- Solvent Based
- Polyurethane
- Yes
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Pine
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.