Vitex LUSSOLAC polyurethane woodstain protects wooden surfaces indoors and outdoors. Its single-component, solvent-based formula, enhanced with polyurethane resin, combines flexibility and hardness. It contains UV filters and is resistant to moisture and sunlight.
Apply with a roller, brush or spray gun. Surfaces must be clean, dry and sanded, and free of resin or oil. Coverage is 12–16 m²/L for one coat and 6–8 m²/L for two coats.
- Type: Woodstain
- Suitable surface: Wood
- Colour: Clear
- Finish: Satin
- Composition: Single-component polyurethane
- Thinning: Solvent-based; thin by up to 3% with T300 or T350 thinner
- Application: With a roller, brush or spray gun
- Touch dry: 3–4 hours
- Recoat time: 20–24 hours
- Coverage: 12–16 m²/L for one coat, 6–8 m²/L for two coats
- Density: 0.95 ± 0.02 kg/L
- Viscosity: 55 ± 10 KU at 25 °C
- VOC content: Maximum 399 g/L
- Application temperature: 5–35 °C
- Relative humidity during application: Below 80%
- Wood moisture content: Up to 18%
- Storage temperature: 5–38 °C
- Quantity: 2.5 L
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Satin
- Insecticide / Antifungal
- No
- Diluting Agent
- Solvent Based
- Polyurethane
- Yes
- 2-Component
- No
- Quantity
- 2.5 lt
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.