High temperature paint based on special silicone resins, ideal for surfaces and structures made of metal or cement that are subjected to intense heat. It withstands temperatures up to 800°C (non-continuous). Easy application with roller, brush, or spray gun. Ready to use, dilution is only necessary when applied with a spray gun.

Drying Time:

• 1st Coat (20°C): 1-2 hours
• Full Drying (20°C): 24 hours

Application Areas: Hot gas pipes, chimneys, fireplaces, stoves, barbecues, grills, exhausts, etc.

Coverage: 12-16m²/l depending on the surface.

With a satin finish.

Application Recommendations:

• Application temperature between 5 and 35°C.
• Clean the surface of grease, silicones, old paints or traces of dirt and rust, then sand and remove the dust.
• Apply the product evenly with a brush or spray gun.
• Let dry for 1-2 hours.
• Before use, apply controlled heat (250°C) for at least 1 hour to favor the curing process and achieve maximum resistance.
• Drying at room temperature in 24 hours.

Manufacturer: Borma Wachs