The Audac AMP203 power amplifier is a compact stereo amplifier with a four-channel Dante/AES67 network input. It delivers 2 × 30 W in stereo mode or 1 × 60 W in bridged mode. It is powered via 802.3bt PoE over an Ethernet cable or with 24 V DC.
DSP functions allow configuration via AUDAC Touch 2 or through RS-485 and Ethernet. The enclosure is cooled by natural air circulation, with no fan. It features protection against overheating, overload and DC short circuits, as well as signal limiting.
- Type: Power amplifier
- Technology: Solid
- Channels: Stereo
- RMS/AES power at 2 Ω in bridged mode: 1 × 60 W
- RMS/AES power at 4 Ω in stereo mode: 2 × 30 W
- RMS/AES power at 4 Ω in bridged mode: 1 × 60 W
- RMS/AES power at 8 Ω in stereo mode: 2 × 30 W
- RMS/AES power at 8 Ω in bridged mode: 1 × 30 W
- Inputs: 1 × Ethernet, RS-485, four-channel Dante/AES67
- Outputs: 1 × stereo speaker output, 1 × line output
- Input connectors: RJ45
- Output connectors: 4-pin Euroblock with 5.08 mm pitch and 3-pin Euroblock with 3.81 mm pitch
- Control: RS-485, TCP/IP
- Power supply: 802.3bt PoE or 24 V DC
- Maximum power consumption: 80 W
- Power consumption at rated operation (1/8 MUP): 10.6 W
- Standby power consumption: 3 W
- Idle power consumption: 6.6 W
- Cooling: Natural air circulation
- Width: 16.5 cm
- Height: 4.4 cm
- Depth: 10.8 cm
- Weight: 0.7 kg
Technical Specifications
- Type
- Power Amplifier
- Technology
- Solid
- Channels
- Stereo
Connectivity
- Phono
- No
- Optical
- No
- Coaxial
- No
- USB
- No
- Ethernet
- Yes
- Analog
- Yes
- Headphones
- No
- Subwoofer
- No
- Wifi
- No
- Bluetooth
- No
Features & Functions
- Radio
- No
Dimensions
- Width
- 16.5 cm
- Length
- 10.8 cm
- Height
- 4.4 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.