TILELUX is a specially designed high-quality satin water-based paint for wall tiles. Its composition and the use of the special additive STEPlus make it unique for coloring surfaces made of tiles exposed to particularly difficult and humid environments. It is characterized by excellent adhesion even to glossy tiles (>6Mpa) and outstanding resistance to wet environments, use of shampoos, shower gels, classic cleaning products, descaling products, diluted bleach, white vinegar, and the alternating use of hot and cold water. It is a unique solution for bathroom and shower renovations.

Features-Properties

• Easy application
• Excellent finish
• No primer needed
• Excellent adhesion
• Outstanding resistance to wet environments
• Exceptional durability against cleaning products, bathroom products, and the alternating use of hot and cold water

Usage Instructions:

• Add the special additive STEPlus and mix very well for about 5 minutes.
• Dilution: 10-15% with water
• Application: Apply TILELUX in two layers with a roller or brush. A third layer may be applied depending on the shade and gloss of the surface.
• Consumption: Approximately 12-14 m²/l on suitably prepared surfaces.

General Remarks:

For the best possible result, it is recommended to use the paint mixture with the special additive STEPlus within 10 days. The product is applied in room temperature conditions, from 12°C to 25°C. Optimal performance and adhesion of the product are achieved after 15-20 days from application. During this period, avoid direct impact, friction, and cleaning of the surface. To clean painted surfaces, use a mild detergent and a soft sponge. Clean tools immediately after application with water and detergent (if deemed necessary).