TILELUX is a specially designed high-quality satin water-based paint for wall tiles. Its composition and the use of the special additive STEPlus make it unique for coloring tile surfaces that are exposed to particularly difficult and humid environments. It is characterized by excellent adhesion even on glossy tiles and exceptional resistance to humid environments and cleaning products.

Features-Properties:

• Easy application
• Excellent finish
• No primer required
• Excellent adhesion
• Exceptional resistance to humid environments
• Exceptional resistance to cleaners and bathroom products

Instructions for Use:

• Add the special additive STEPlus and mix very well for about 5 minutes.
• Dilution: 10-15% with water.
• Application: Apply TILELUX in two layers with a roller or brush. A third layer may be applied depending on the shade and gloss of the surface.
• Coverage: Approximately 12-14 m²/l on properly prepared surfaces.

General Remarks:

• For the best possible result, it is recommended to use the mixture of paint with the special additive STEPlus within 10 days.
• The product is applied under room temperature conditions, from 12°C to 25°C.
• The optimal performance and adhesion of the product is achieved after 15-20 days from application. During this time, avoid direct impact, friction, and cleaning of the surface.
• To clean painted surfaces, use a mild detergent and a soft sponge.
• Wash tools immediately after application with water and detergent (if deemed necessary).