Skroutz.cy

Vevor Single-phase Submersible Pump Motor 1.46hp WSBBX15HP220VF22VV2
Submersible Water Pumps

Vevor Single-phase Submersible Pump Motor 1.46hp WSBBX15HP220VF22VV2

VEVOR Submersible Water Pump, 1100W 20000L/H

Suitable for clear or dirty water, ideal for draining floods, emptying gardens, pools, hot tubs.

Efficient & Durable Motor
  • Powerful 1100W motor for...

VEVOR Submersible Water Pump, 1100W 20000L/H

Suitable for clear or dirty water, ideal for draining floods, emptying gardens, pools, hot tubs.

Efficient & Durable Motor
  • Powerful 1100W motor for maximum performance.
  • Durable stainless steel construction for long-lasting use.
Automatic Operation
  • Equipped with an automatic float switch for automatic activation...
See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
87 59 €
88 Coins 88 Coins
Delivery Mon, 14 Sep - Fri, 18 Sep
7,50 € to a Skroutz Point or 8,50 € to an address
Do you want it with 2,50 € shipping to Skroutz Point?
Sent from Greece
From Bluestore 5.0 (23)
5.0 (23 reviews)
Greece
20+ pieces
See Water Pumps on the page of Bluestore
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

VEVOR Submersible Water Pump, 1100W 20000L/H

Suitable for clear or dirty water, ideal for draining floods, emptying gardens, pools, hot tubs.

Efficient & Durable Motor
  • Powerful 1100W motor for maximum performance.
  • Durable stainless steel construction for long-lasting use.
Automatic Operation
  • Equipped with an automatic float switch for automatic activation and deactivation.
Various Outlet Sizes
  • Multiple outlet options for flexibility in use.
Technical Specifications
  • Current: 2.7A
  • Cable Length: 33 ft / 10 m
  • Maximum Flow: 88 GPM / 333.3 L/min
  • Voltage: 230V 50Hz
  • Protection Type: IPX8
  • Model: QSB-2JH-1100B96
  • Maximum Lift: 29.5 ft / 9 m
  • Water Temperature: 32-95℉ / 0-35℃
  • Power: 1100W / 1.5HP

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

VEVOR Submersible Water Pump, 1100W 20000L/H

Suitable for clear or dirty water, ideal for draining floods, emptying gardens, pools, hot tubs.

Efficient & Durable Motor
  • Powerful 1100W motor for maximum performance.
  • Durable stainless steel construction for long-lasting use.
Automatic Operation
  • Equipped with an automatic float switch for automatic activation and deactivation.
Various Outlet Sizes
  • Multiple outlet options for flexibility in use.
Technical Specifications
  • Current: 2.7A
  • Cable Length: 33 ft / 10 m
  • Maximum Flow: 88 GPM / 333.3 L/min
  • Voltage: 230V 50Hz
  • Protection Type: IPX8
  • Model: QSB-2JH-1100B96
  • Maximum Lift: 29.5 ft / 9 m
  • Water Temperature: 32-95℉ / 0-35℃
  • Power: 1100W / 1.5HP

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

87,59 €
7,50 € to a Skroutz Point
or   8,50 €   shipping cost