Isomat ISOLAC-DUCO GLOSS enamel is intended for metal surfaces such as doors, railings, machinery and tools, and provides a glossy finish. It is alkyd-based, dries quickly and resists wear and impact, making it suitable for both interior and exterior use.
Apply to a dry substrate in two coats, using ISOLAC-RUST PRIMER as a primer. For galvanized surfaces or aluminium, use EPOXYCOAT-AC. Thin with SM-21 for application by brush or roller, and with SM-22 for airless application.
- Type: Metal
- Product type: Enamel
- Colour: Mocha
- Finish: Gloss
- Composition: Alkyd
- Use: Interior and exterior
- Suitable surfaces: Metal
- Application: Brush, roller or airless spray
- Thinning with SM-21: Up to 5% for application by brush or roller
- Thinning with SM-22: 10–20% for airless application
- Coats: 2
- Touch-dry time: 3 hours at 23°C
- Through-dry time: 9 hours at 23°C
- Waiting time between coats: Approximately 24 hours
- Application temperature: +10°C to +35°C
- Hiding power: ≥ 98% with two coats
- Gloss: Over 84 Gloss
- Volume solids: 45 ± 2%
- White density: 1.20 ± 0.03 kg/l
- Dry film thickness: 45 ± 5 μm
- Coverage: Approximately 15 m² per litre per coat
- Quantity: 0.75 lt
Product Details
- Type
- Metal
- Type
- Varnish Colour
- Colour
- Brown
- Quantity in lt
- 0.75 lt
Especially
- Finish
- Shiny
- Acrilyc
- No
- Water
- No
- Solvent
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.