MARTELE Varnish Paint of special synthetic resins. Protects, decorates, and gives the surface the appearance of hammered metal. Used for painting metal surfaces, appliances, and machinery. Offers strong adhesion and quick drying.

Surface Preparation:

• Clean the surface from dust, grease, oils, peeling old paints, rust, mold residue, or moisture.
• Prime the surface with the corresponding recommended primer of the product (Primer).
• Shake the product well and apply it to the surface.
• The product acquires all its mechanical resistances after 20 - 30 days.

Application Conditions:

• Avoid applying the product at temperatures below 6°C and above 40°C.
• Avoid application when relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the product.

Application Tools:

• Brush
• Roller

During work, keep the tools “wet” in the container. Drain the product well from the tools and clean them immediately with white spirit. If the product dries, it can only be removed with strong detergents. Do not empty wash liquids into the water table.

Attention: Wear protective gloves, protective clothing, and personal protection for the eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.

Call the Poison Control Center immediately at 210 7793777.

Shades: Available in 12 color chart shades.

MARTELE Varnish Paint Coverage: 8-10m2 / Lt on suitably prepared surfaces.

Thinning: 2-5% Nitro Thinner.

Drying: 30 minutes depending on application conditions.