Skroutz.cy

SM3 Gray/Black/Yellow Fluo Matte Child Motorcycle Helmet Motocross DOT ECE 22.06 1060g
Motorcycle Helmets

SM3 Gray/Black/Yellow Fluo Matte Child Motorcycle Helmet Motocross DOT ECE 22.06 1060g Code: 8301925-9510

Anatomically designed and specifically shaped for young and younger riders, the brand-new SM3 Youth helmet is optimized for MX, Enduro, and off-road use and features a whole range of technologies and...

Anatomically designed and specifically shaped for young and younger riders, the brand-new SM3 Youth helmet is optimized for MX, Enduro, and off-road use and features a whole range of technologies and innovations from Alpinestars' adult helmet range to offer the optimal combination of performance, protection, and comfort.

See full description See full description

Top specs

See all

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    DOT

    Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt

Size

Size

Age
198 99 €
Delivery Fri, 27 Nov - Tue, 01 Dec
6,00 € to a Skroutz Point or 7,00 € to an address
Do you want it with 5,00 € shipping discount?
Sent from Greece
From MotoHub 4.9 (10)
4.9 (10 reviews)
Greece
See Rider Equipment on the page of MotoHub

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Questions
Review the product
Product report

Description & Specifications

Anatomically designed and specifically shaped for young and younger riders, the brand-new SM3 Youth helmet is optimized for MX, Enduro, and off-road use and features a whole range of technologies and innovations from Alpinestars' adult helmet range to offer the optimal combination of performance, protection, and comfort.

Features

  • This lightweight helmet features a thermal-injection shell that incorporates a special blend of polymers reinforced with varying degrees of thickness, designed to provide the optimal combination of impact protection and lightweight.
  • The lightweight outer shell is made from a technologically advanced impact-resistant thermoplastic in three sizes (Youth Small, Youth Medium, and Youth Large).
  • Separate shell versions for DOT and ECE requirements: the DOT-certified version of the helmet's inner shell is made with composite fibers assembled between the outer shell and the EPS liner for maximum impact protection.
  • The fit can be customized to the rider's head thanks to the helmet's crown and pads, which are available as replacements in different thicknesses.
  • The sizes Youth Medium (YM) and Youth Large (YL) share the same EPS size, allowing riders with YM size to initially purchase a YM helmet and then upgrade to a Youth Large size as they grow through the crown and cheek pad replacements.
  • The Youth Small (YS) has a smaller EPS size and can only be adjusted through the pads. Alpinestars' extensive research has shown that children wearing a YS size are very young, typically 3 to 4 years old, and therefore require special helmet fitting.

Construction

  • The multi-density inner lining ensures that the helmet is equipped with the right density in the right area for enhanced impact absorption, while also helping to reduce the overall weight.
  • The inner and outer surfaces are designed to minimize the effects of oblique impacts.
  • Alpinestars' patented low-friction coating is applied to the inner part of the main EPS lining to reduce rotational acceleration forces that may result from certain oblique impacts.
  • Maximized ventilation thanks to 10 intake and seven exhaust ports.
  • The visor is designed to direct air to the ports for enhanced airflow.
  • The patented visor release system ensures that the visor releases with the correct predetermined amount of force, effectively reducing the forces exerted on the rider's neck during an impact.
  • The Comfort lining is made from recycled materials for a lower carbon footprint.
  • The hydration tube channels are integrated into the helmet pads for convenience and performance.
  • The soft fabric chin strap is 25mm for optimal rider safety and comfort.

Protection

  • Alpinestars has introduced a new internal standard for the SM3 Youth to test the chin of the helmet under conditions heavier than the standard, and in order to pass Alpinestars' new standards, the thickness of the shell and the structure of the helmet's design itself have been optimized in the chin area for superior impact performance.
  • Stainless steel D-rings ensure a tight and secure fit.
  • Equipped with an emergency release system and removable pads to allow safe and easy removal of the pads while the helmet is still worn, while the 3D contoured foam ensures rider comfort.
  • The SM3 helmet complies with both DOT certification and ECE 2206 homologation for worldwide use.

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
8301925-9510

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1060 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Grey
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
DOT, ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

DOT

Safety standard applicable in the United States. Includes tests for energy absorption, shell strength, and strap retention. It is less stringent than European standards but remains internationally recognized.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

198,99 €
6,00 € to a Skroutz Point
or   7,00 €   shipping cost
Alpinestars