The Motorline LINCE400-er4-FULL-KIT motor kit automates double-leaf swing gates and includes two linear electromechanical actuators with permanent grease lubrication. Each motor operates on a single-phase 230 V supply and can move a gate leaf weighing up to 250 kg and measuring up to 3 m wide. The actuator has a useful piston stroke of 40 cm and a maximum opening angle of 108°.

The electronic control unit is housed in a weatherproof plastic enclosure. The kit also includes two wireless remote controls, wired safety photocells, mounting brackets and pins, two 8 μF capacitors, two release keys and installation instructions. In the event of a power failure, the motors can be disengaged with the hex key for manual operation.

• Gate type: Double-leaf swing
• Actuator type: Linear, electromechanical, permanently grease-lubricated, non-reversible
• Direction: Right
• Maximum weight per gate leaf: 250 kg
• Maximum width per gate leaf: 3 m
• Maximum width without an electric lock: 2.5 m per gate leaf
• Maximum opening angle: 108°
• Useful piston stroke: 40 cm
• Operating voltage: 230 V, single-phase
• Power consumption: 230 W per motor
• Supply current: 1.3 A
• Capacitor capacity: 8 μF
• Maximum force: 2300 N
• Maximum duty cycle: 25% - S3
• Opening and closing cycles per hour: Up to 20 at 20 °C
• Motor speed: 1400 rpm
• Operating temperature: From -25 °C to +65 °C
• Winding thermal protection: 120 °C
• Thermal reset time: 5 min
• Actuator speed: Up to 0.018 m/s
• Opening/closing time: From 13 s to 180 s
• Protection rating: IP54
• Housing material: Aluminium
• Housing colour: Black
• Manual release: With a hex key
• Control unit: 1
• Remote controls: 2
• Safety photocells: 1 set, wired
• Motors: 2
• Package contents: Control unit with weatherproof plastic enclosure, remote controls, photocells, mounting brackets and pins, capacitors, release keys and installation instructions
• Country of manufacture: Portugal
• Declaration of conformity: CE