Top quality plastic paint for interior use. It offers great coverage and whiteness. It provides a velvety surface and spreads perfectly. It is easy to work with using a roller, brush, or spray gun on a cleaned surface. It has very high resistance to frequent washing. It does not contain ammonia. Certified product according to EN 71-3 standard.

For proper adhesion, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold residues, or moisture. For new or porous surfaces, first apply the corresponding recommended primer of the product.

Apply the product in 2 coats (after mixing it well) which should be spaced 1 - 2 hours apart. The product acquires all its mechanical resistance after 20 - 30 days.

Application conditions:

• Avoid applying the product at temperatures below 6°C and above 40°C.
• Avoid application when relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the paint.

Application tools:

• Brush
• Roller
• Spray gun

During work, keep the tools "wet" in the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not empty the washing liquids into the water table.