High-quality waterborne satin acrylic polyurethane enamel for interior and exterior use. It offers significantly longer working time, ensuring a perfect finish. It combines quick drying, easy application, and high resistance to weather conditions. It allows the surface to breathe. Applied on primed surfaces or previously painted wooden, metal, and various other surfaces. It is odorless, does not yellow, and is easily washable.

Shades: White and 1,694 shades.

Gloss level: 20-25 at a 60º observation angle

Surface Preparation

• Surfaces must be clean, dry, and free from loose – peeling paints, dust, oils. Glossy surfaces should be sanded.
• Apply 2 coats of CS 587 ULTRATRIM Satin Water Enamel for Wood and Metal, provided the surfaces are primed as indicated by the following instructions:
• New Wood: Various defects should be filled and locally primed with CS 023 THE PERFECT PRIMER Ecological Multi-Purpose Undercoat or with CS 570 THE PERFECT PRIMER Alkyd Multi-Purpose Undercoat. Allow to dry and then generally prime. Sand with sandpaper.
• New Plaster and Drywall: Prime one coat with CS 192 WALL PLUS Ecological Micronized Acrylic Undercoat.
• Metals: Remove rust and peeling before priming with CS 568 THE PERFECT PRIMER Anti-Rust Undercoat.
• Previously Painted Surfaces: Prime one coat with CS 023 THE PERFECT PRIMER Ecological Multi-Purpose Undercoat or with CS 570 THE PERFECT PRIMER Alkyd Multi-Purpose Undercoat.

Application

Stir well before use. Use with brush, roller, or spray gun. Thin 5% with water. Do not apply at temperatures below 10ºC. Drying time is delayed in cold, humid conditions.

Cleaning of Tools

Clean tools immediately after use with warm water and soap.

Safety Instructions

• If medical advice is needed, have the product container or label at hand.
• Keep out of reach of children.
• Keep container tightly closed.
• Avoid contact with eyes, skin, or clothing.
• Avoid release into the environment.
• Dispose of contents and container to a suitable waste disposal or recycling center in accordance with local and national regulations.
• Safety data sheet available on request.
• Contains: a mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1), 1,2-Benzisothiazol-3(2H)-one, and 2,4,7,9-Tetramethyldec-5-yne-4,7-diol.
• May cause an allergic reaction.

Coverage 15-16 m2/L

Thinning 5% water

Application Brush, roller, or spray gun

Drying at 20°C In 2 hours