The SINUS PLUS 1500 12V voltage inverter is used to power electrical devices that require an alternating voltage of 230 V from batteries and cars with a constant voltage of 12 V. It can also be used as a backup power source for devices that require continuous current, such as ovens and central heating pumps.
The PLUS versions additionally offer a control panel with a cable that can be connected to the inverter and controlled remotely with the button on the panel. There are also 2 LEDs on the panel that inform the user about the status of the inverter (ON / OFF, error).
One of the features that distinguishes sinusoidal waveform inverters from simple classic AC / DC is the alternating voltage output with a sine waveform, which is identical to that of the power grid. This allows the powering of devices equipped with electric motors and transformers, such as power tools, pumps, and low-power appliances.
Simple inverters, with lower cost, actually produce rectangular voltage, which is sometimes mistakenly referred to as modified sine wave. This voltage is not suitable for powering devices with inductive or capacitive characteristics and can cause damage to them.
- Height: 342 mm
- Width: 201 mm
- Weight: 3768g
- Voltage Output: 225-235V
- Dimensions: 342x201x94mm
- Operating Temperature: -10-40°C
- Output Connections: 2 x 230V Socket
- Battery Voltage: 12V
- Input Voltage: 10.5-15.5V
- Output Voltage Frequency: 50Hz (+-2Hz)
- Total Capacity (momentary - short duration): 1500VA
- Constant Capacity: 1000W
- Efficiency at full load: 92%
- High threshold protection: 10.7v (+-0.3V)
- Capacity Type: Car Battery
- Output Waveform Type: Modified Sine Wave
- Power
- 1000 W
- DC Input Voltage
- 12 V
- AC Output Voltage
- 230 V
- Number of Sockets
- -
- Type
- Modified Sinewave
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.