Skroutz.cy

LED Strip 220V RGB Light 2x5m Type SMD5050 with Power Supply & Remote Control
LED Strips

LED Strip 220V RGB Light 2x5m Type SMD5050 with Power Supply & Remote Control Code: 1141

600 bright SMD 5050 diodes with 3 chips each - blue, red, and green, allowing them to mix into different shades (including white)

All diodes light up simultaneously in the selected color!

The set...

600 bright SMD 5050 diodes with 3 chips each - blue, red, and green, allowing them to mix into different shades (including white)

All diodes light up simultaneously in the selected color!

The set includes: - 2 x 5 m adhesive RGB LED strip with 60 SMD 5050 diodes per meter - power supply - 10A adapter with cable and plug - 144 W controller with IR remote...

See full description See full description

Top specs

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    220V

    The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.

  • Light Shade

    RGB

    The led film can take various shades by combining the colors, red, green and blue.
  • Connectivity IR
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

600 bright SMD 5050 diodes with 3 chips each - blue, red, and green, allowing them to mix into different shades (including white)

All diodes light up simultaneously in the selected color!

The set includes: - 2 x 5 m adhesive RGB LED strip with 60 SMD 5050 diodes per meter - power supply - 10A adapter with cable and plug - 144 W controller with IR remote control (direct line of sight required between the controller sensor and the remote control). The remote control has 24 buttons, 16 colors, 4 dynamic modes, and the ability to adjust the brightness of the light and the flashing speed. 

For uniform lighting, the two tape rolls are connected in parallel to the controller! 

  • LED Type SMD5050 
  • Number of diodes 60 LED/m 
  • Length 10 m - 2 rolls x 5 m 
  • Power supply 12V - 10A 
  • 220V AC / 12V DC transformer included 
  • Power 14.4 W/m - watt/meter 
  • Protection rating IP20 
  • Diode color RGB

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
1141

Dimensions

Length
10 m
Power Source
220V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

220V

The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Remote control, Power supply
USB
No

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
14.4 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
Connectivity
IR
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

6 users have this product and can help you

Ask for the product

Description & Specifications

600 bright SMD 5050 diodes with 3 chips each - blue, red, and green, allowing them to mix into different shades (including white)

All diodes light up simultaneously in the selected color!

The set includes: - 2 x 5 m adhesive RGB LED strip with 60 SMD 5050 diodes per meter - power supply - 10A adapter with cable and plug - 144 W controller with IR remote control (direct line of sight required between the controller sensor and the remote control). The remote control has 24 buttons, 16 colors, 4 dynamic modes, and the ability to adjust the brightness of the light and the flashing speed. 

For uniform lighting, the two tape rolls are connected in parallel to the controller! 

  • LED Type SMD5050 
  • Number of diodes 60 LED/m 
  • Length 10 m - 2 rolls x 5 m 
  • Power supply 12V - 10A 
  • 220V AC / 12V DC transformer included 
  • Power 14.4 W/m - watt/meter 
  • Protection rating IP20 
  • Diode color RGB

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
1141

Dimensions

Length
10 m
Power Source
220V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

220V

The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Remote control, Power supply
USB
No

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
14.4 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
Connectivity
IR
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.