Repair kit designed for the removal of dents from the car body. The set is easy to use and, most importantly, 100% safe for the car's paint.

The set includes:

• An inertia hammer for dent removal.
• A set of 28 different shapes and sizes of suction devices.
• 7 hot melt glue sticks.
• A spatula for removing the glue.

Product Features:

• Easy and safe to use.
• Inertia hammer equipped with a reusable shock absorption spring.
• 28 suction devices of various sizes and shapes.
• The set includes 7 hot melt glue sticks and a spatula for removing the glue.

Instructions:

• Select the appropriate plug for the size of the dent - usually you need a plug about 20% smaller in diameter than the diameter of the dent.
• Apply "hot" glue generously (preferably with a special gun) to the disc plate and apply it to the body where the dent is located.
• Wait for the glue to dry.
• Place the inertia hammer on the body so that it catches the protruding part of the adapter/mushroom.
• Move the hammer's weight in the opposite direction, gently hitting the plug.
• After the dent is removed, gently detach the suction device.
• If you are afraid of causing damage to the body while trying to remove the suction device, use, for example, a hairdryer to heat up the glue.
• Remove glue residues with the spatula.