High-quality acrylic plaster ideal for building facades, resistant to extreme weather conditions with excellent protective properties against UV radiation. It is extremely compact, has excellent adhesion and elasticity.

General Characteristics:

• Suitable for the protection and decoration of external and internal surfaces such as plaster, concrete, thermal insulation systems for building facades.
• Certified with the CE marking according to the EN 15824 standard.
• Part of the Vitextherm external thermal insulation system, certified with the CE marking according to the ETAG-004 specifications.
• Excellent protection from UV radiation and exceptional adhesion.

Instructions:

Preparation: Surfaces must be clean, dry, and smooth, free from dust, oils, or any flaky materials or paint. On new cement, concrete, gypsum board surfaces, or surfaces with previous plastic or acrylic water-based paints, apply Granikot Primer.

Application: Stir well before use. Apply with a stainless steel spatula with a maximum dilution of 2% with water and use a plastic spatula to create the final effect. It should not be applied at temperatures below 5°C, above 35°C, and/or relative humidity above 80%. Avoid direct exposure to sunlight.

The product is dry to the touch in 4-6 hours and fully cured in 24 hours. These times may vary depending on weather conditions. After complete curing, the material does not require additional protection from extreme weather conditions. Tools should be cleaned immediately after use with water and, if necessary, with soap or detergent.