Skroutz.cy

Raider RD-CAWP50 Single-Phase Rainwater Submersible Water Pump 0.49hp 070157
Submersible Water Pumps

Raider RD-CAWP50 Single-Phase Rainwater Submersible Water Pump 0.49hp 070157

Key features:

  • Power 370W & voltage 230V
  • Flow rate 34L/min (2040L/h)
  • Maximum delivery height 14m
  • Suction depth up to 7m

You transfer clean water quickly and efficiently, utilizing the 370W power and 2,040 liters per hour flow rate of the RAIDER submersible pump.

See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    14

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

54 30 €
55 Coins 55 Coins
Delivery Thu, 15 Oct - Mon, 19 Oct
3,50 € to a Skroutz Point or 4,50 € to an address
Do you want it with Free shipping to Skroutz Point?
Sent from Greece
From Apostologiorgakis
Greece
17 pieces
See Water Pumps on the page of Apostologiorgakis
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Product report

Description

Description

At a glance

  • Power 370W: Rated power 370W with 230V supply for stable household use.
  • Flow Rate 34L/min: Maximum water flow of 2,040 liters per hour for fast transfer.
  • Height & Depth: Maximum delivery height of 14 meters and suction depth up to 7 meters.
  • Versatile Use: 1-inch outlet, 8-meter cable, and weight of 3.94 kg.

Stable 370W Performance and High Water Flow

Meet your daily pumping needs at home or in your garden with complete confidence. The RAIDER RD-CAWP50 submersible pump features a 370W motor, offering a maximum flow rate of 34 liters per minute (2040 L/h). This way, you can quickly empty tanks and pools, maintaining a steady supply of clean water without interruptions.

High delivery height 14m and depth 7m

You lift the water exactly where you need it, even from deep points. The pump achieves a maximum delivery height of up to 14 meters and can be submerged to a depth of up to 7 meters. With the 1-inch nozzle, you ensure a smooth flow, making the device ideal for pumping from wells, tanks, and other household installations.

Easy installation and comfortable handling

You place and carry the device easily thanks to its low weight, which is only 3.94 kilograms. The built-in 8-meter power cable offers you great freedom of movement during installation. It connects directly to the 230V household network so you can start pumping immediately.

Specifications

  • Manufacturer / Model: RAIDER RD-CAWP50
  • Product Code: 070157
  • Type: Submersible clean water pump
  • Power: 370 W
  • Voltage: 230 V
  • Outlet: 1"
  • Maximum Water Flow: 34 L/min (2040 L/h)
  • Maximum Delivery Height: 14 m
  • Maximum Suction Depth: 7 m
  • Cable Length: 8 m
  • Application: Clean water
  • Net Weight: 3.94 kg

Package Contents

  • 1 x Submersible clean water pump RAIDER RD-CAWP50
  • 1 x 8m power cable

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Rainwater
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.49 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
367.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
14 m

Maximum Head Height: 14


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • FixitEngineeringServices
    5
    3 out of 3 members found this review helpful
    FixitEngineeringServices

    This pump is not for wastewater but for clean water according to the manufacturer with whom I communicated via email. Please change the description

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Georgios_Kemanidis

    Verified purchase

    It works just fine so far.

    Translated from Greek ·
    Did you find this review helpful?
Questions

Questions

Do you have a question about the product?

15 users have this product and can help you

Ask for the product

Description & Specifications

At a glance

  • Power 370W: Rated power 370W with 230V supply for stable household use.
  • Flow Rate 34L/min: Maximum water flow of 2,040 liters per hour for fast transfer.
  • Height & Depth: Maximum delivery height of 14 meters and suction depth up to 7 meters.
  • Versatile Use: 1-inch outlet, 8-meter cable, and weight of 3.94 kg.

Stable 370W Performance and High Water Flow

Meet your daily pumping needs at home or in your garden with complete confidence. The RAIDER RD-CAWP50 submersible pump features a 370W motor, offering a maximum flow rate of 34 liters per minute (2040 L/h). This way, you can quickly empty tanks and pools, maintaining a steady supply of clean water without interruptions.

High delivery height 14m and depth 7m

You lift the water exactly where you need it, even from deep points. The pump achieves a maximum delivery height of up to 14 meters and can be submerged to a depth of up to 7 meters. With the 1-inch nozzle, you ensure a smooth flow, making the device ideal for pumping from wells, tanks, and other household installations.

Easy installation and comfortable handling

You place and carry the device easily thanks to its low weight, which is only 3.94 kilograms. The built-in 8-meter power cable offers you great freedom of movement during installation. It connects directly to the 230V household network so you can start pumping immediately.

Specifications

  • Manufacturer / Model: RAIDER RD-CAWP50
  • Product Code: 070157
  • Type: Submersible clean water pump
  • Power: 370 W
  • Voltage: 230 V
  • Outlet: 1"
  • Maximum Water Flow: 34 L/min (2040 L/h)
  • Maximum Delivery Height: 14 m
  • Maximum Suction Depth: 7 m
  • Cable Length: 8 m
  • Application: Clean water
  • Net Weight: 3.94 kg

Package Contents

  • 1 x Submersible clean water pump RAIDER RD-CAWP50
  • 1 x 8m power cable

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Rainwater
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.49 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
367.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
14 m

Maximum Head Height: 14


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • FixitEngineeringServices
    5
    3 out of 3 members found this review helpful
    FixitEngineeringServices

    This pump is not for wastewater but for clean water according to the manufacturer with whom I communicated via email. Please change the description

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Georgios_Kemanidis

    Verified purchase

    It works just fine so far.

    Translated from Greek ·
    Did you find this review helpful?
54,30 €
3,50 € to a Skroutz Point
or   4,50 €   shipping cost