Skroutz.cy

Raider Single-phase Pump Waste Water / Sewage 750W 070161
Submersible Water Pumps

Raider Single-phase Pump Waste Water / Sewage 750W 070161

Technical Specifications:

  • Power: 750W
  • Type: Submersible Pump
  • Voltage: 230V
  • Outlet: 2” (inches)
  • Manometric: 9m
  • Maximum Flow Rate: 200L/min (12000l/h)
  • Maximum Suction Depth: 7m
  • Wired - Cable Length: 8m...

Technical Specifications:

  • Power: 750W
  • Type: Submersible Pump
  • Voltage: 230V
  • Outlet: 2” (inches)
  • Manometric: 9m
  • Maximum Flow Rate: 200L/min (12000l/h)
  • Maximum Suction Depth: 7m
  • Wired - Cable Length: 8m
  • Application: Drainage - Sewage
  • Weight: 12.76Kg

The Raider RD-CAWP54 submersible wastewater pump is designed to handle any use. It has a power of 750W and the...

See full description See full description

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
93 95 €
94 Coins 94 Coins
Delivery Fri, 17 Jul - Tue, 21 Jul
25,00 € shipping cost
Do you want it with 20,00 € shipping?
Sent from Greece
From Shop13 Kallithea 4.8 (128)
4.8 (128 reviews)
Greece
1 piece
See Water Pumps on the page of Shop13 Kallithea
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Technical Specifications:

  • Power: 750W
  • Type: Submersible Pump
  • Voltage: 230V
  • Outlet: 2” (inches)
  • Manometric: 9m
  • Maximum Flow Rate: 200L/min (12000l/h)
  • Maximum Suction Depth: 7m
  • Wired - Cable Length: 8m
  • Application: Drainage - Sewage
  • Weight: 12.76Kg

The Raider RD-CAWP54 submersible wastewater pump is designed to handle any use. It has a power of 750W and the ability to pump water to a height of up to 9 meters and a depth of up to 7 meters. Its maximum flow rate is 12000l/h, and it comes with an 8-meter cable for connection to power.

Important Features:

  • High Performance: With a power of 750W and a maximum flow of 12000L/h.
  • Highly Durable: Built to withstand challenging conditions underwater.
  • Wired: Equipped with an 8m cable for easy connection to power.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
12 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

6 users have this product and can help you

Ask for the product

Description & Specifications

Technical Specifications:

  • Power: 750W
  • Type: Submersible Pump
  • Voltage: 230V
  • Outlet: 2” (inches)
  • Manometric: 9m
  • Maximum Flow Rate: 200L/min (12000l/h)
  • Maximum Suction Depth: 7m
  • Wired - Cable Length: 8m
  • Application: Drainage - Sewage
  • Weight: 12.76Kg

The Raider RD-CAWP54 submersible wastewater pump is designed to handle any use. It has a power of 750W and the ability to pump water to a height of up to 9 meters and a depth of up to 7 meters. Its maximum flow rate is 12000l/h, and it comes with an 8-meter cable for connection to power.

Important Features:

  • High Performance: With a power of 750W and a maximum flow of 12000L/h.
  • Highly Durable: Built to withstand challenging conditions underwater.
  • Wired: Equipped with an 8m cable for easy connection to power.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
12 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

93,95 €
25,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
10€ coupon from the shop Unique Noir until 09/07!
10€ coupon from the shop Unique Noir until 09/07!
See more