Water-soluble, single-component wood varnish based on a combination of acrylic and polyurethane resins. It protects and decorates wooden surfaces in indoor or outdoor areas and is resistant to moisture and intense sunlight.

DESCRIPTION

GENERAL CHARACTERISTICS

• Water-soluble, odorless, single-component wood varnish based on a combination of self-crosslinking acrylic and polyurethane resins for wooden surfaces in indoor and outdoor areas.
• It has excellent spreading and high resistance to adverse weather conditions, such as intense sunlight or increased humidity.
• Available colorless in glossy, satin, and matte finish.

TECHNICAL SPECIFICATIONS

• Surface drying time: 2-3 h
• Water dilution percentage: 10%
• Coverage 12-14m²/lt
• Application with a brush
• Application with a roller
• Application with a spray gun

INSTRUCTIONS

PREPARATION

• Surfaces must be clean, dry, free of resin or oil, and sanded.
• On new wooden surfaces, Diaxyl Décor preservative is applied.

APPLICATION

The product is stirred well before use. It is applied in one or two coats with a roller, brush, or spray gun, diluted up to 10% with water. It should not be applied at temperatures below 5°C, above 35°C, and/or relative humidity over 80%. The product is dry to the touch in 1-2 hours and can be recoated after 6-8 hours. These times vary depending on weather conditions (relative humidity and temperature).

The tools are cleaned immediately after use with water and, if necessary, with soap or detergent.