Acrylic transparent impregnating varnish of a single component that highlights the natural beauty of the stone and keeps it always “alive.” It protects against moisture and stain absorption without creating a film, yellowing, or peeling.

GENERAL CHARACTERISTICS:

• Acrylic transparent varnish for stone, for indoor and outdoor use.
• Impregnates the surface without creating a film.
• Enhances the natural color of the surface.
• Suitable for all stones or slabs, natural or artificial.
• Colorless, does not create a film.

TECHNICAL SPECIFICATIONS:

• Surface drying time: 1-2 hours.
• Coverage: 10-12 m²/liter.
• Application with a brush, roller, or spray gun.

PREPARATION INSTRUCTIONS:

Surfaces must be dry and clean from dust, oils, grease, or old varnishes.

APPLICATION:

The product is stirred well before use. It is applied in one or two layers with a roller, brush, or airless spray gun without dilution. It should not be applied at temperatures below 5°C or above 35°C and/or relative humidity above 80%. The product is dry to the touch in 1-2 hours and can be recoated after 3-4 hours. These times may vary depending on weather conditions.

Rollers, brushes, and stains on the floor can be cleaned with Brush Thinner T 300 and then with soap or detergent. Spray guns can be cleaned with Spray Gun Thinner T 350.