The Cudy IG100P unmanaged Layer 2 switch is designed for industrial use in environments such as manufacturing facilities, transportation, ships, and mines. It has 8 Gigabit RJ45 ports with PoE+ support and a total power budget of up to 240 W. The PoE Watchdog, Extend Mode, and VLAN Mode features are activated using physical buttons.

The aluminum housing has an IP40 rating. The switch is powered via a 4-pin terminal block and supports dual power inputs for redundancy.

• Type: Unmanaged Layer 2 switch
• Ethernet ports: 8 Gigabit RJ45 ports, with speeds of 1000 Mbps
• PoE: PoE+ on all ports, IEEE 802.3af/at, up to 30 W per port
• Total PoE budget: Up to 240 W
• Switching speed: 1 Gbps
• Switching capacity: Up to 16 Gbps
• Forwarding rate: 11.9 Mpps
• Jumbo frame: Up to 9 KB
• Buffer memory: 1.5 Mbit
• MAC address table: Up to 4096 addresses
• PoE Watchdog: Automatically restarts devices that have not responded for more than 5 minutes
• Extend Mode: Range of up to 250 m at 10 Mbps on ports 1–4
• VLAN Mode: Isolates ports 1–7
• Broadcast Storm Prevention: Helps prevent network congestion
• Feature controls: Physical buttons
• Mounting: Rack-mountable
• Power supply: 44–57 V DC via a 4-pin terminal block, with dual power inputs
• ESD protection: 8 kV contact and 15 kV air discharge
• Surge protection: Up to 6 kV on RJ45 ports and up to 4 kV on the power input
• Additional protection: Reverse polarity and short-circuit protection
• Operating temperature: −40 °C to +75 °C
• Storage temperature: Up to +85 °C
• Housing: Aluminum, with an IP40 rating
• Durability: Resistant to vibration, shock, and drops in accordance with IEC standards