Glossy lacquer with high coverage, elasticity, and durability. Easy to work with and spreads very well. Beautifies and decorates with 44 ready-made shades.

GENERAL CHARACTERISTICS

• Glossy lacquer
• High quality and durability
• Metallic / Wooden surfaces
• 44 shades

TECHNICAL SPECIFICATIONS

• Surface drying time: 2-3h
• Dilution rate with solvent: 5%
• Yield: 14 - 16m² / lt
• Application with brush
• Application with roller
• Application with spray gun

PREPARATION INSTRUCTIONS

Surfaces should be cleaned with Brush Solvent T 300, be dry and smooth, free of dust, oils, and sanded with suitable sandpaper. Metallic surfaces should be primed with anti-rust primer (Anti-Rust Primer, New Type Minium or Metal Primer). Glossy metallic surfaces (galvanized, aluminum, etc.) should be primed with Glossy Surfaces Primer or Wash Primer.

APPLICATION

The product should be stirred well before use. It is applied in two coats with a roller or brush with a dilution of 5% with Brush Solvent T 300 or airless spray gun with a dilution of 5% with Spray Gun Solvent T 350. It should not be applied at temperatures below 5°C, above 35°C, and/or relative humidity over 80%. The product is dry to the touch in 2-3 hours and can be overpainted after 20-24 hours. These times vary depending on weather conditions (relative humidity and temperature). Surfaces painted with Verolac can be washed after 30 days from painting.

Rollers, brushes, and stains on the floor are cleaned with Brush Solvent T 300 and then with soap or detergent. Spray guns are cleaned with Spray Gun Solvent T 350.