Manual oil pump for barrel 150cm 19L/min
- Maximum output: 19 l/min
- Maximum lift height: 5 mm
- Maximum lift depth: 1.5 m
- Weight: approximately 4 kg
Application: The pump is used for extracting liquids such as oils or greases from barrels into smaller containers. To use the pump, place it on the opening of the barrel to allow the crank to rotate freely. Screw a securing ring onto the thread of the barrel's filling hole and insert the pump's pipe through it. Secure it with a screw that is located on the ring. Place a container under the pump's outlet and start pumping by rotating the handle. Once you have completed the task, pull the pump out of the barrel and make a few more turns to empty the pump of any remaining oil. Wipe the outer parts of the pump to remove any oil residue with a dry, clean cloth and store the pump in a dry, well-ventilated area.