Automatic Circuit Breaker

ETI Automatic Circuit Breaker 25A Single-pole AC 002421414

Three-position switch, selectable power switch I-0-II (1-0-2) network-generator 25A 1P single-pole, modular manufacturer: Model ETI: SSQ 125.

The SSQ I-0-II modular power switches allow for simple and...

Three-position switch, selectable power switch I-0-II (1-0-2) network-generator 25A 1P single-pole, modular manufacturer: Model ETI: SSQ 125.

The SSQ I-0-II modular power switches allow for simple and uninterrupted switching between power sources in case of emergency (e.g., power loss from the grid). They are intended for installation in distribution boards...

See full description See full description
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing

Description

Description

Three-position switch, selectable power switch I-0-II (1-0-2) network-generator 25A 1P single-pole, modular manufacturer: Model ETI: SSQ 125.

The SSQ I-0-II modular power switches allow for simple and uninterrupted switching between power sources in case of emergency (e.g., power loss from the grid). They are intended for installation in distribution boards adapted for the installation of modular equipment – equipped with TH35 rails.

The switches can be sealed for the selected position: I or II.

  • Nominal current (A): 25
  • Rated AC voltage (V): 230
  • Number of poles: 1
  • Degree of protection IP: 20
  • Possible cross-section (mm2): 16
  • Rated frequency (Hz): 50/60
  • Standards: 60947-3

Advantages:

  • The family of installation switches extends the modular system of EVE devices.
  • All switches are manufactured in a modular form - unit width of 18 mm.
  • The distance between the switch contacts in the open position is greater than 3 mm.
  • The switches have terminals that allow the connection of wires with the following cross-section:
    • 16 mm2 for a solid wire type cable.
    • 10 mm2 for a stranded wire cable.

The modular equipment from the Slovak company ETI ensures effective protection of electrical installations and devices. ETI equipment is widely used in construction and industry, where there are electrical installations, distribution boards, or lighting.

Manufacturer

See full description

Specifications

Specifications

Specifications

Number of Poles
1
Rated Current
25 A

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Three-position switch, selectable power switch I-0-II (1-0-2) network-generator 25A 1P single-pole, modular manufacturer: Model ETI: SSQ 125.

The SSQ I-0-II modular power switches allow for simple and uninterrupted switching between power sources in case of emergency (e.g., power loss from the grid). They are intended for installation in distribution boards adapted for the installation of modular equipment – equipped with TH35 rails.

The switches can be sealed for the selected position: I or II.

  • Nominal current (A): 25
  • Rated AC voltage (V): 230
  • Number of poles: 1
  • Degree of protection IP: 20
  • Possible cross-section (mm2): 16
  • Rated frequency (Hz): 50/60
  • Standards: 60947-3

Advantages:

  • The family of installation switches extends the modular system of EVE devices.
  • All switches are manufactured in a modular form - unit width of 18 mm.
  • The distance between the switch contacts in the open position is greater than 3 mm.
  • The switches have terminals that allow the connection of wires with the following cross-section:
    • 16 mm2 for a solid wire type cable.
    • 10 mm2 for a stranded wire cable.

The modular equipment from the Slovak company ETI ensures effective protection of electrical installations and devices. ETI equipment is widely used in construction and industry, where there are electrical installations, distribution boards, or lighting.

Manufacturer

Specifications

Number of Poles
1
Rated Current
25 A

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

14,57 €
4,50 €   shipping cost