Skroutz.cy

Geko Electric Surface Water Pump 250W Single-Phase
Surface Water Pumps

Geko Electric Surface Water Pump 250W Single-Phase Code: G81440

The pump is designed for pits, for pumping water from wells and other sources (streams, rivers...). It is large and powerful.

Features:
  • Motor: 250W
  • Pumping capacity between 3 and 10 m3/h
  • Epoxy...

The pump is designed for pits, for pumping water from wells and other sources (streams, rivers...). It is large and powerful.

Features:
  • Motor: 250W
  • Pumping capacity between 3 and 10 m3/h
  • Epoxy resin-coated tank
  • High voltage capacitors
  • 304 copper wire motor
  • Stainless steel pump column
  • Automatic floatswitch
  • Thermal protection against overheating
Technical...
See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
110 04 €
111 Coins 111 Coins
Delivery Fri, 24 Jul - Thu, 30 Jul
10,00 € to a Skroutz Point or 11,00 € to an address
Delivery Mon, 03 Aug - Fri, 07 Aug
9,00 € to a Skroutz Point or 10,00 € to an address
Do you want it with 5,00 € shipping to Skroutz Point?
Sent from Greece
From Getters 4.5 (107)
4.5 (107 reviews)
Greece
20+ pieces
See Water Pumps on the page of Getters
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The pump is designed for pits, for pumping water from wells and other sources (streams, rivers...). It is large and powerful.

Features:
  • Motor: 250W
  • Pumping capacity between 3 and 10 m3/h
  • Epoxy resin-coated tank
  • High voltage capacitors
  • 304 copper wire motor
  • Stainless steel pump column
  • Automatic floatswitch
  • Thermal protection against overheating
Technical specifications:
  • Power management: 230V/50Hz
  • Power consumption: 2.1A
  • Capacity: 3-10 m3/h
  • Maximum flow rate: 167 liters/minute
  • Connection diameter: 1"
  • Maximum displaced quantity: 8.5m
  • Maximum suction height: 7m
  • Cable length: 5.6m
  • Material: nickel, cast iron
  • Maximum temperature of pumped liquid: 40°C
  • Capacitor: 10 µF
  • Protection category: IPX8

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
G81440

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Power
250 W
Flow Rate
10 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
10 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The pump is designed for pits, for pumping water from wells and other sources (streams, rivers...). It is large and powerful.

Features:
  • Motor: 250W
  • Pumping capacity between 3 and 10 m3/h
  • Epoxy resin-coated tank
  • High voltage capacitors
  • 304 copper wire motor
  • Stainless steel pump column
  • Automatic floatswitch
  • Thermal protection against overheating
Technical specifications:
  • Power management: 230V/50Hz
  • Power consumption: 2.1A
  • Capacity: 3-10 m3/h
  • Maximum flow rate: 167 liters/minute
  • Connection diameter: 1"
  • Maximum displaced quantity: 8.5m
  • Maximum suction height: 7m
  • Cable length: 5.6m
  • Material: nickel, cast iron
  • Maximum temperature of pumped liquid: 40°C
  • Capacitor: 10 µF
  • Protection category: IPX8

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
G81440

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Power
250 W
Flow Rate
10 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
10 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

110,04 €
10,00 € to a Skroutz Point
or   11,00 €   shipping cost
10% επιστροφή σε έπιπλα κήπου & βεράντας
10% επιστροφή σε έπιπλα κήπου & βεράντας
Μην την χάσεις