Skroutz.cy

Bosch Solo Battery Powered Pulse Sander 12V with Suction System 06019L0001
Sanders

Bosch Solo Battery Powered Pulse Sander 12V with Suction System 06019L0001

GSS 12V-13 Orbital Sander 12V (Solo)
Body Only. Battery and charger not included.

Specifications

  • Battery voltage: 12.0 V
  • Rated speed: 6000 – 10000 rpm
  • Orbit diameter: 1.600 mm
  • Oscillation rate without...

GSS 12V-13 Orbital Sander 12V (Solo)
Body Only. Battery and charger not included.

Specifications

  • Battery voltage: 12.0 V
  • Rated speed: 6000 – 10000 rpm
  • Orbit diameter: 1.600 mm
  • Oscillation rate without load: 12,000 – 20,000 min-1
  • Applications: Carpenter and woodworker
  • Uncertainty K: 3 dB
  • Sound pressure level: 71 dB(A)
  • Total vibration values: 1.500
  • Plate...
See full description See full description
  • Number of Batteries 0

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    1.6

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 800 gr
  • See all
220 00 €
220 Coins 220 Coins
Delivery by Mon, 13 Jul
Free shipping cost
Sent from Greece
From Toolflix 5.0 (54)
5.0 (54 reviews)
Greece
1 piece
See Power Tools on the page of Toolflix
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

GSS 12V-13 Orbital Sander 12V (Solo)
Body Only. Battery and charger not included.

Specifications

  • Battery voltage: 12.0 V
  • Rated speed: 6000 – 10000 rpm
  • Orbit diameter: 1.600 mm
  • Oscillation rate without load: 12,000 – 20,000 min-1
  • Applications: Carpenter and woodworker
  • Uncertainty K: 3 dB
  • Sound pressure level: 71 dB(A)
  • Total vibration values: 1.500
  • Plate material sanding: 3.600
  • Weight (without battery): 0.800 kg
  • Gross weight: 1.0680

Description

  • Features speed selection.
  • Dust bag.
  • Battery status indicator.
  • Interchangeable sanding plates in three different sizes.
  • Ideal companion for users who are always on the go.
  • Excellent tool balance with the center of gravity close to the workpiece.
  • Easy handling thanks to intuitive operation.
  • Ideal for basic and intermediate sanding, varnish removal, and surface finishing.
  • Can be used on wood, veneer, varnish, filler, as well as mineral and acrylic materials.
  • Compatible with Bosch's Click & Clean dust extraction system and the Professional 12V System.

Included

  • L-BOXX 136
  • Dust bag
  • Base plate, 80 x 130 mm with sanding plate
  • Delta base plate, 100 x 150 mm with sanding plate
  • Base plate, 113 x 101 mm with sanding plate
  • 1x sanding sheet C470, Best for Wood + Paint, 120
  • 1x sanding sheet C470, Best for Wood + Paint, 120
  • 1x sanding sheet C470, Best for Wood + Paint, 120
  • Punch tool

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
800 gr
Weight (with Battery)
800 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
12 V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
20000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

GSS 12V-13 Orbital Sander 12V (Solo)
Body Only. Battery and charger not included.

Specifications

  • Battery voltage: 12.0 V
  • Rated speed: 6000 – 10000 rpm
  • Orbit diameter: 1.600 mm
  • Oscillation rate without load: 12,000 – 20,000 min-1
  • Applications: Carpenter and woodworker
  • Uncertainty K: 3 dB
  • Sound pressure level: 71 dB(A)
  • Total vibration values: 1.500
  • Plate material sanding: 3.600
  • Weight (without battery): 0.800 kg
  • Gross weight: 1.0680

Description

  • Features speed selection.
  • Dust bag.
  • Battery status indicator.
  • Interchangeable sanding plates in three different sizes.
  • Ideal companion for users who are always on the go.
  • Excellent tool balance with the center of gravity close to the workpiece.
  • Easy handling thanks to intuitive operation.
  • Ideal for basic and intermediate sanding, varnish removal, and surface finishing.
  • Can be used on wood, veneer, varnish, filler, as well as mineral and acrylic materials.
  • Compatible with Bosch's Click & Clean dust extraction system and the Professional 12V System.

Included

  • L-BOXX 136
  • Dust bag
  • Base plate, 80 x 130 mm with sanding plate
  • Delta base plate, 100 x 150 mm with sanding plate
  • Base plate, 113 x 101 mm with sanding plate
  • 1x sanding sheet C470, Best for Wood + Paint, 120
  • 1x sanding sheet C470, Best for Wood + Paint, 120
  • 1x sanding sheet C470, Best for Wood + Paint, 120
  • Punch tool

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
800 gr
Weight (with Battery)
800 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
12 V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
20000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
3 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

220,00 €
Free   shipping cost