High-quality plastic paint for interior use. Offers great coverage and whiteness. It provides a velvety surface and spreads perfectly. Easy to work with a roller, brush, or spray gun on a cleaned surface. It has very high resistance to frequent washing. Does not contain ammonia. Certified product according to the EN 71-3 standard.

To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeled old paints, rust, mold residues, or moisture. For new or porous surfaces, apply the corresponding recommended primer (Step primer, Life dur water, Step plaster) first.

Apply the product in 2 coats (after mixing it well) which should be spaced 1 - 2 hours apart. The product gains all its mechanical strengths after 20 - 30 days.

Application conditions

Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.

Application tools

• Brush
• Roller
• Paint spray gun

During the work, keep the tools “wet” in the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of the washing liquids into the groundwater.