Skroutz.cy

Single-phase Water Pump 0.03hp GF-2276
Submersible Water Pumps

Single-phase Water Pump 0.03hp GF-2276

The SUBMERSIBLE PUMP FOR AQUARIUM 25W, MAXIMUM FLOW 30L/MIN can be used as a water recirculation pump in aquariums, ponds, submersible pumps for fountains, pumps for waterfalls, or various...

The SUBMERSIBLE PUMP FOR AQUARIUM 25W, MAXIMUM FLOW 30L/MIN can be used as a water recirculation pump in aquariums, ponds, submersible pumps for fountains, pumps for waterfalls, or various constructions that involve the promotion, movement, or dropping of water.

It is a submersible pump that draws water from the bottom side, surrounding 360°. It can be used...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The SUBMERSIBLE PUMP FOR AQUARIUM 25W, MAXIMUM FLOW 30L/MIN can be used as a water recirculation pump in aquariums, ponds, submersible pumps for fountains, pumps for waterfalls, or various constructions that involve the promotion, movement, or dropping of water.

It is a submersible pump that draws water from the bottom side, surrounding 360°. It can be used at low water levels as long as the pump remains submerged. It features a quiet operation, good insulation, and is safe to use with water. It operates at temperatures between 5 - 35 °C.

Technical specifications:
  • Works only submerged in water and lifts a column of water with a maximum height of 2 meters.
  • Quiet operation, well insulated, and safe to use with water.
  • Long lifespan and resistance to corrosion.
  • Efficient and with minimal energy consumption.
  • Develops flow but not pressure!
  • Insulation class: IPx8
  • Flow: 1.8 m³/h
  • Dimensions: 104x84x106 mm
  • Frequency: 50 Hz
  • Lift height: 2 m
  • Pump body material: ABS
  • Noise level: 40 dB
  • Power: 25 W
  • Maximum operating temperature: ＜35℃
  • Voltage: 220 ÷ 230V
  • Product type: Submersible pumps for aquarium

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.03 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
22.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
1.8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

4 users have this product and can help you

Ask for the product

Description & Specifications

The SUBMERSIBLE PUMP FOR AQUARIUM 25W, MAXIMUM FLOW 30L/MIN can be used as a water recirculation pump in aquariums, ponds, submersible pumps for fountains, pumps for waterfalls, or various constructions that involve the promotion, movement, or dropping of water.

It is a submersible pump that draws water from the bottom side, surrounding 360°. It can be used at low water levels as long as the pump remains submerged. It features a quiet operation, good insulation, and is safe to use with water. It operates at temperatures between 5 - 35 °C.

Technical specifications:
  • Works only submerged in water and lifts a column of water with a maximum height of 2 meters.
  • Quiet operation, well insulated, and safe to use with water.
  • Long lifespan and resistance to corrosion.
  • Efficient and with minimal energy consumption.
  • Develops flow but not pressure!
  • Insulation class: IPx8
  • Flow: 1.8 m³/h
  • Dimensions: 104x84x106 mm
  • Frequency: 50 Hz
  • Lift height: 2 m
  • Pump body material: ABS
  • Noise level: 40 dB
  • Power: 25 W
  • Maximum operating temperature: ＜35℃
  • Voltage: 220 ÷ 230V
  • Product type: Submersible pumps for aquarium

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.03 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
22.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
1.8 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.