Switches

Cisco Catalyst C1300-48P-4X Managed L2 PoE+ Switch with 48 Gigabit (1Gbps) Ethernet Ports and 4 SFP Ports

The Cisco Catalyst C1300-48P-4X managed switch connects devices through 48 Gigabit Ethernet ports with PoE+ and features 4 10 Gigabit SFP+ uplink ports. It provides up to 375 W to power connected...

The Cisco Catalyst C1300-48P-4X managed switch connects devices through 48 Gigabit Ethernet ports with PoE+ and features 4 10 Gigabit SFP+ uplink ports. It provides up to 375 W to power connected devices such as IP phones and surveillance cameras over Ethernet. It is rack-mountable and supports stacking of up to 8 units.

For network management, it...

See full description See full description
1853 57 €
Delivery Thursday, 26 November
Free shipping cost
Sent from Greece
From Techstores 4.8 (96)
Greece
2 pieces
See Networking on the page of Techstores
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing

Description

Description

The Cisco Catalyst C1300-48P-4X managed switch connects devices through 48 Gigabit Ethernet ports with PoE+ and features 4 10 Gigabit SFP+ uplink ports. It provides up to 375 W to power connected devices such as IP phones and surveillance cameras over Ethernet. It is rack-mountable and supports stacking of up to 8 units.

For network management, it supports Cisco Business Dashboard, Network Plug and Play, SNMP, and remote management via Bluetooth. It also supports QoS, IPv4/IPv6 routing, IEEE 802.1X, ARP inspection, IP Source Guard, and Energy Efficient Ethernet (IEEE 802.3az).

  • Type: Managed switch
  • Operating layer: Layer 3
  • Ethernet ports: 48 RJ-45 10/100/1000 Mbps with PoE+
  • Uplink ports: 4 10 Gigabit SFP+
  • PoE standards: IEEE 802.3af and IEEE 802.3at
  • PoE power budget: 375 W
  • Switching capacity: 176 Gbps, non-blocking
  • Forwarding rate: 130.94 mpps for 64-byte packets
  • Packet memory: 1.5 MB
  • Processor: 1.4 GHz
  • Flash memory: 512 MB
  • Management: Cisco Business Dashboard, Network Plug and Play, SNMP, and Bluetooth
  • Network features: QoS, IPv4/IPv6 routing, and inter-VLAN communication
  • Security features: IEEE 802.1X, ARP inspection, and IP Source Guard
  • Energy efficiency: Energy Efficient Ethernet (IEEE 802.3az)
  • Stacking: Up to 8 units via Front Panel Stacking
  • Installation: Rack-mountable
  • Power supply: Internal
  • Fans: 1
  • Idle power consumption: 20.51 W at 110 V or 20.27 W at 220 V

Manufacturer

See full description

Specifications

Specifications

Network Specifications

Type
Managed
Layer
L2
PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
48 Port
Ethernet Speed
1000 Mbps
SFP connections
4 Port
Rack mounting
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Cisco Catalyst C1300-48P-4X managed switch connects devices through 48 Gigabit Ethernet ports with PoE+ and features 4 10 Gigabit SFP+ uplink ports. It provides up to 375 W to power connected devices such as IP phones and surveillance cameras over Ethernet. It is rack-mountable and supports stacking of up to 8 units.

For network management, it supports Cisco Business Dashboard, Network Plug and Play, SNMP, and remote management via Bluetooth. It also supports QoS, IPv4/IPv6 routing, IEEE 802.1X, ARP inspection, IP Source Guard, and Energy Efficient Ethernet (IEEE 802.3az).

  • Type: Managed switch
  • Operating layer: Layer 3
  • Ethernet ports: 48 RJ-45 10/100/1000 Mbps with PoE+
  • Uplink ports: 4 10 Gigabit SFP+
  • PoE standards: IEEE 802.3af and IEEE 802.3at
  • PoE power budget: 375 W
  • Switching capacity: 176 Gbps, non-blocking
  • Forwarding rate: 130.94 mpps for 64-byte packets
  • Packet memory: 1.5 MB
  • Processor: 1.4 GHz
  • Flash memory: 512 MB
  • Management: Cisco Business Dashboard, Network Plug and Play, SNMP, and Bluetooth
  • Network features: QoS, IPv4/IPv6 routing, and inter-VLAN communication
  • Security features: IEEE 802.1X, ARP inspection, and IP Source Guard
  • Energy efficiency: Energy Efficient Ethernet (IEEE 802.3az)
  • Stacking: Up to 8 units via Front Panel Stacking
  • Installation: Rack-mountable
  • Power supply: Internal
  • Fans: 1
  • Idle power consumption: 20.51 W at 110 V or 20.27 W at 220 V

Manufacturer

Network Specifications

Type
Managed
Layer
L2
PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
48 Port
Ethernet Speed
1000 Mbps
SFP connections
4 Port
Rack mounting
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.853,57 €
Free   shipping cost