The Audac MFA216 installation power amplifier operates in Class D and delivers 2 × 80 W into low-impedance systems. In bridged mode, it can power 70/100 V constant-voltage systems with up to 160 W.
The SourceCon slot allows the installation of a compatible module, while the microphone/line and stereo line inputs support connections from audio sources. The microphone/line input features phantom power and a priority switch for microphones or prerecorded messages, as well as a priority mute function. The MFA series can be controlled via RS232, RS485 and TCP/IP, with control and configuration also available through the AUDAC Touch 2 app.
- Type: Installation power amplifier
- Channels: 2
- Amplifier class: D
- Stereo-mode power: 2 × 80 W at 4, 8 and 16 Ω
- Bridged-mode power: 160 W at 70/100 V
- Frequency response: 20 Hz – 20 kHz (±3 dB)
- Signal-to-noise ratio: >90 dB
- THD+N: <0.05% at 1 kHz
- Microphone/line inputs: 1 balanced, with phantom power
- Stereo line input: 1 unbalanced, RCA and 3.5 mm Mini Jack
- SourceCon slots: 1
- Priority mute contacts: 1
- Outputs: 1 line output and 1 70/100 V output in bridged mode
- Control: RS232, RS485 and TCP/IP
- Power supply: 100–240 V AC, 50–60 Hz
- Dimensions: 217.5 × 43.7 × 300 mm (W × H × D)
- Weight: 2.20 kg
- Mounting: 19″ rack-mount, 1U high, or desktop
- Construction material: Steel
- Optional accessories: 19″ rack-mount adapter, MWX45 wall controller, ANI44XT Dante/AES67 audio network interface
Technical Specifications
- Amplifier Type
- Commercial Amplifier
- Type
- Power Amplifier
- Zones
- -
- Power (8Ω)
- -
- Power (100V)
- 80 W
Additional Specifications
- Radio
- No
- Cooling system
- No
Connectivity
- RCA
- No
- XLR
- No
- Mini Jack (3.5mm)
- No
- Jack (6.3mm)
- No
- USB
- No
- Ethernet
- No
- Bluetooth
- No
- Mic In
- No
Dimensions
- Width
- -
- Height
- 80 mm
- Length
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.