The Intellinet 561198 unmanaged Layer 2 Switch combines 16 Gigabit Ethernet PoE+ ports with 2 SFP slots for data transfer and powering compatible devices over Cat5e or Cat6 cables. Each Ethernet port provides up to 30 W, with a total PoE power budget of 374 W, and can power devices such as access points, VoIP phones, and IP cameras.

PoE Device Monitoring (PDM) automatically reboots unresponsive devices, and scheduled reboots are also supported. The switch provides power consumption information for each device, lets you set a power limit and priority for each port, and sends SNMP trap notifications when total power consumption exceeds the configured limit.

• Type: Unmanaged Layer 2 Switch
• Ethernet ports: 16 RJ45 10/100/1000 Mbps
• SFP slots: 2
• Switching speed: 1 Gbps
• Switching capacity: 36 Gbit/s
• PoE standards: IEEE 802.3at/af (PoE/PoE+)
• PoE power: Up to 30 W per port, with a total budget of 374 W
• PoE management: Power consumption monitoring, per-port power limits and priorities, PoE enable/disable per port, port startup delay
• Device monitoring: Automatic and scheduled reboot of connected PoE devices
• Network features: VLAN, SNMP, IPv4, IPv6, auto-detection, Jumbo Frames up to 9000 bytes
• Notifications: SNMP trap when the configured total power consumption limit is exceeded
• Protection: Short-circuit, overload, and overvoltage protection
• Buffer: 512 kB
• MAC address table: 8000 entries
• Enclosure: Black metal
• Fans: 2
• Noise level: 45 dB
• Dimensions: Height 44 mm, width 440 mm, depth 208 mm
• Weight: 2.5 kg
• Operating temperature: 0 to 40 °C
• Operating humidity: 10 to 90%
• Storage temperature: -20 to 90 °C
• Package contents: Mounting kit