SURFACE PREPARATION
- To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paint, rust, mold or moisture residues.
- For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).
- Apply the product in 2 coats (after mixing it well) which should be spaced 1 - 2 hours apart.
DILUTION
- First coat: 15% water.
- Second coat: 5-10% water.
APPLICATION CONDITIONS
- Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.
APPLICATION TOOLS
- Brush
- Roller
- Paint spray gun
During work, keep the tools "wet" in the container or in the product's bucket. Wring out the tools well back in the box and clean them immediately with warm water and soap. If the product dries, it only comes off with strong detergents. Do not dispose of washing liquids in the groundwater.
WARNING: Wear protective gloves / protective clothing / eye / face protection equipment. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.
Specifications
- Type
- Concrete Paint
- Colour
- Copper
- Acrilyc
- Yes
Quantity
- Volume
- 0.97 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.