Surface Preparation

• For proper adhesion of the product, clean the surface of dust, grease, oils, peeling old paints, rust, and residues of mold or moisture.
• For new or porous surfaces, first apply the recommended primer of the product (Life dur, Life dur water).
• Apply the product in 2 coats, mixing well before application. The coats should be applied 1 - 2 hours apart.

Dilution

• First coat: 15% water.
• Second coat: 5-10% water.

Application Conditions

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is above 80%. Adverse conditions can alter the final properties of the paint.

Application Tools

• Brush
• Roller
• Paint spray gun

During work, keep the tools “wet” in the container or the vessel with the product. Wring the tools back into the box and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of the wash fluids in the groundwater.

Warning: Wear protective gloves, protective clothing, and personal protective equipment for the eyes and face. In case of contact with the eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.