To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold, or moisture residues.

For new or porous surfaces, first apply the corresponding recommended primer of the product (Step primer, Life dur water, Step plaster).

Apply the product in 2 coats (after shaking it well) which should be spaced 1 - 2 hours apart. The product achieves all its mechanical strengths after 20 - 30 days.

Application conditions:

• Avoid applying the product at temperatures below 6°C and above 40°C.
• Avoid applying the product when the relative humidity is above 80%.
• Adverse conditions during application can alter the final properties of the paint.

Application tools:

• Brush
• Roller
• Paint sprayer

During the work, keep the tools “wet” inside the container. Drain the product well from the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not empty the wash liquids into the groundwater.