To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold residues, or moisture.

For new or porous surfaces, first apply the corresponding recommended primer of the product (Step primer, Life dur water, Step plaster).

Apply the product in 2 coats (after stirring it well) with a drying time of 1 - 2 hours between coats. The product achieves all its mechanical strengths after 20 - 30 days.

Application Conditions

Avoid applying the product at temperatures below 6°C and above 40°C, and when the relative humidity is above 80%. Adverse conditions during application can alter the final properties of the paint.

Application Tools

• Brush
• Roller
• Paint sprayer

During work, keep the tools “wet” inside the container. Wipe excess product off the tools and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids in the water table.