Spraying pump for tractors Ferroni ML20, 180 liters/minute, made of cast iron, with a connection diameter of 30 mm. Pumps from the ML series are self-priming with nylon wheels that connect directly to the tractor or the carrier, without the use of a drive shaft. The ML tractor pump allows for flow delivery adjustment thanks to the brass pressure regulating valve. It is capable of self-priming without the need for internal pre-filling. It operates easily even on uneven ground and has a maximum height of 250 meters. Suitable for irrigation tasks (with or without sprayers) or for transferring any non-corrosive liquid (not for wine) and for high-pressure washing. Made in Italy.

Pump Details:

• Maximum flow 180 liters/minute
• Maximum suction depth 7-8 meters
• Flow direction: clockwise
• Absorbing power: 5.5 hp - 4 kW
• Dimensions: 18 x 22 x 19 cm
• Weight 11 Kg
• Pump body made of cast iron
• Rotor with nylon wheels
• Cast iron cover
• 2 x 30 mm connections
• Chain for securing to a fixed point of the tractor

The difference in diameter between the suction and discharge ports (30-19 mm) allows for various pressures. ML.I 25 tractor pumps enable delivery flow adjustment thanks to the brass pressure regulating valve. Through a fluid recirculation system that increases or decreases, it allows:

• Variation of flow in liters per minute of the pump
• Variation of pressure

Other Ferroni pump models not equipped with recirculation operate with high flow and pressure as they do not have a liquid recirculation valve, therefore pressure and flow can only be varied by increasing or decreasing the torque of the intake. Full attachment chain with quick attachment carabiner. It connects directly to the tractor's intake, by placing the female socket directly onto the male socket of the tractor. The chain is secured to a fixed point on the tractor and must be tight and stable enough to prevent the pump from slipping off the intake.