Cable Testers

Sonel Cable Tester WMPLTDR410

The Sonel WMPLTDR410 cable tester detects open circuits, short circuits, moisture damage, and other impedance changes in power, copper telecommunications, coaxial, and infrastructure cables. It...

The Sonel WMPLTDR410 cable tester detects open circuits, short circuits, moisture damage, and other impedance changes in power, copper telecommunications, coaxial, and infrastructure cables. It graphically displays the fault and the distance from the instrument to its location. Measurements can be performed automatically or manually, with automatic fault...

See Description & Specifications See Description & Specifications
1769 55 €
Delivery Thu, 19 Nov - Mon, 23 Nov
Free shipping cost
Sent from Greece
From Getters 4.6 (112)
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Questions

Description & Specifications

The Sonel WMPLTDR410 cable tester detects open circuits, short circuits, moisture damage, and other impedance changes in power, copper telecommunications, coaxial, and infrastructure cables. It graphically displays the fault and the distance from the instrument to its location. Measurements can be performed automatically or manually, with automatic fault location (AFL), manual range and sensitivity selection, and single measurements or continuous scanning.

The 11 measurement ranges cover distances from 7 m to 4000 m, while the maximum measurement distance from one end is 4000 m. The backlit LCD has a resolution of 64 x 128 pixels and a 2.5” diagonal.

  • Cable types: Power, copper telecommunications, coaxial, and infrastructure cables
  • Fault detection: Open circuits, short circuits, moisture damage, and impedance changes
  • Functions: Automatic or manual measurement, automatic fault location (AFL), single measurement, and continuous scanning
  • Measurement ranges: 7, 15, 30, 60, 120, 250, and 500 m; 1, 2, 3, and 4 km
  • Maximum measurement length from one end: 4000 m
  • Measurement dead zone: 0.5 m
  • Range and sensitivity selection: Manual
  • Sensitivity adjustment: Automatic or manual
  • Impedance settings: Impedance matching and output impedance of 25, 50, 75, and 100 Ω
  • Velocity factor: 1% to 99% or 2.5 to 148.5 m/μs
  • Measurement resolution: Approximately 1% of the selected range
  • Accuracy: 1% of the range
  • Sensitivity: At least 3 pixels for a fault reflection at 4 km on a 0.6 mm copper cable
  • Output pulse: 5 Vp-p into an open circuit
  • Output pulse width: 3 ns to 3 μs
  • Scan rate: 2 measurements per second
  • Audio signal generator: 810 to 1110 Hz
  • Display: 2.5” LCD, 64 x 128 pixels, backlit
  • Power supply: 4 x 1.5 V AA alkaline batteries or 4 AA NiMH rechargeable batteries
  • Battery life: 30 hours of continuous scanning
  • Automatic power-off: After 1, 2, 3, or 5 min, or disabled
  • Operating temperature: -10 °C to +50 °C
  • Storage temperature: -20 °C to +70 °C
  • Overvoltage protection: 250 V AC
  • Enclosure: Sealed and mechanically robust
  • Dimensions: 165 x 90 x 37 mm
  • Weight: 350 g

Manufacturer

Socket
-
Digital
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.769,55 €
Free   shipping cost