Skroutz.cy

Simet 4-Poles Inspired T1 Panel Lightning Protection 50kA
Panel Lightning Protection

Simet 4-Poles Inspired T1 Panel Lightning Protection 50kA Code: 85205003

Lightning arrester based on the B+C spark gap 4P 30kA SIMTEC SI50B+C - 85205003

  • Electrical Parameters:
  • Rated voltage AC (Un): 230V
  • Pulse current Iimp (10/350μs) [L,N-Pe]: 12.5 total
  • [L1+L2+L3+N-Pe]:...

Lightning arrester based on the B+C spark gap 4P 30kA SIMTEC SI50B+C - 85205003

  • Electrical Parameters:
  • Rated voltage AC (Un): 230V
  • Pulse current Iimp (10/350μs) [L,N-Pe]: 12.5 total
  • [L1+L2+L3+N-Pe]: 50 kA
  • Rated discharge current - 8/20 μs (In): 30 kA
  • Max. discharge current (Imax): 60 kA
  • Voltage protection level: 1.5 kV
  • Operating time (TA): 25 ns
  • ...
See full description See full description
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Lightning arrester based on the B+C spark gap 4P 30kA SIMTEC SI50B+C - 85205003

  • Electrical Parameters:
  • Rated voltage AC (Un): 230V
  • Pulse current Iimp (10/350μs) [L,N-Pe]: 12.5 total
  • [L1+L2+L3+N-Pe]: 50 kA
  • Rated discharge current - 8/20 μs (In): 30 kA
  • Max. discharge current (Imax): 60 kA
  • Voltage protection level: ≤ 1.5 kV
  • Operating time (TA): ≤ 25 ns
  • Permissible humidity (Rh): 5-95%
  • Insulation resistance (Risol): > 10 3 MΩ
  • Max. additional fuse gL/gG: 1
  • Frequency: 40 ... 63 Hz
  • Remote control fault indication
  • Compliance with standards: EC 61643-11:2012 (PN-EN 61643-11:2013-06)
  • Mechanical Parameters:
  • Connected cable cross-section:
    • Rigid: 2.5 ... 35 mm2
    • Flexible: 2.5 ... 35 mm2
  • Housing material: PA66 UL 94V-0, gray color
  • Installation: 35 mm rail EN 60715
  • Operating temperature range: TU -40°... +85°C
  • Protection level: IP20
  • Thermal disconnect device: yes
  • Remote signaling cable cross-section: maximum cable 1.5 mm2, wire rope

Two-stage lightning arrester type 1 + 2 used to dynamically manage supply installations due to atmospheric over-voltages and for protection against internal over-voltages in the power supply network. It is mainly used in LV installations such as residential and office buildings. It is installed in cable plugs or main distribution boards.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
85205003
Number of Poles
4
Type
T1

Type

T1

It has the ability to discharge strong currents from lightning strikes and is installed in the main panel of buildings.
Replacement Cartridge
No
Maximum Discharge Current (kA)
50

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Lightning arrester based on the B+C spark gap 4P 30kA SIMTEC SI50B+C - 85205003

  • Electrical Parameters:
  • Rated voltage AC (Un): 230V
  • Pulse current Iimp (10/350μs) [L,N-Pe]: 12.5 total
  • [L1+L2+L3+N-Pe]: 50 kA
  • Rated discharge current - 8/20 μs (In): 30 kA
  • Max. discharge current (Imax): 60 kA
  • Voltage protection level: ≤ 1.5 kV
  • Operating time (TA): ≤ 25 ns
  • Permissible humidity (Rh): 5-95%
  • Insulation resistance (Risol): > 10 3 MΩ
  • Max. additional fuse gL/gG: 1
  • Frequency: 40 ... 63 Hz
  • Remote control fault indication
  • Compliance with standards: EC 61643-11:2012 (PN-EN 61643-11:2013-06)
  • Mechanical Parameters:
  • Connected cable cross-section:
    • Rigid: 2.5 ... 35 mm2
    • Flexible: 2.5 ... 35 mm2
  • Housing material: PA66 UL 94V-0, gray color
  • Installation: 35 mm rail EN 60715
  • Operating temperature range: TU -40°... +85°C
  • Protection level: IP20
  • Thermal disconnect device: yes
  • Remote signaling cable cross-section: maximum cable 1.5 mm2, wire rope

Two-stage lightning arrester type 1 + 2 used to dynamically manage supply installations due to atmospheric over-voltages and for protection against internal over-voltages in the power supply network. It is mainly used in LV installations such as residential and office buildings. It is installed in cable plugs or main distribution boards.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
85205003
Number of Poles
4
Type
T1

Type

T1

It has the ability to discharge strong currents from lightning strikes and is installed in the main panel of buildings.
Replacement Cartridge
No
Maximum Discharge Current (kA)
50

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

283,15 €
Free   shipping cost
25% coupon from the shop Sugarfree until 12/07!
25% coupon from the shop Sugarfree until 12/07!
See more