Skroutz.cy

Artpol Diamond Drill HSS with Cylindrical Shank for Metal 12x375mm
Drills

Artpol Diamond Drill HSS with Cylindrical Shank for Metal 12x375mm

HSS-G metal drill extended 12.0x375mm.

  • Diameter: 12mm
  • Total length: 375mm
  • Drill made of high-speed steel 4241 with a hardness of 62 HRc.
  • Point angle: 118 degrees.
  • Straight grinding without relief...

HSS-G metal drill extended 12.0x375mm.

  • Diameter: 12mm
  • Total length: 375mm
  • Drill made of high-speed steel 4241 with a hardness of 62 HRc.
  • Point angle: 118 degrees.
  • Straight grinding without relief taper, suitable for manual sharpening.
  • Right-hand spiral type N.
  • Cylindrical shank that corresponds to the diameter of the drill.
  • Surface coated with oxide for low...
See full description See full description

Top specs

  • Length 375 mm
  • Drilling Material Metal

  • Drill Bit Shank

    Cylindrical

    It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
  • Diameter 12 mm
  • See all
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

HSS-G metal drill extended 12.0x375mm.

  • Diameter: 12mm
  • Total length: 375mm
  • Drill made of high-speed steel 4241 with a hardness of 62 HRc.
  • Point angle: 118 degrees.
  • Straight grinding without relief taper, suitable for manual sharpening.
  • Right-hand spiral type N.
  • Cylindrical shank that corresponds to the diameter of the drill.
  • Surface coated with oxide for low friction coefficient and increased drilling performance.
  • Compatible with DIN 1869 II.
  • Intended for laboratory applications for alloy and carbon steel with a strength of up to 900N/mm2, gray and ductile cast iron, sintered iron, non-ferrous metals, and hardened plastics.
  • Recommended cooling media: drilling emulsion, lubricant and cutting oil, ester oil.
  • Using coolant increases the drill's lifespan by 4 times.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Drill Material
HSS

Drill Material

HSS
It is made of steel, which is suitable for high-speed work. It is intended for drilling holes in common steel, iron, and non-ferrous metals.
Drill Bit Coating Material
Diamond
Suitable for
Metal
Drill Top
Cylindrical

Drill Top

Cylindrical
It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
Set with Tips
No
Pieces
1 pcs
Length
375 mm
Diameter
12 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

HSS-G metal drill extended 12.0x375mm.

  • Diameter: 12mm
  • Total length: 375mm
  • Drill made of high-speed steel 4241 with a hardness of 62 HRc.
  • Point angle: 118 degrees.
  • Straight grinding without relief taper, suitable for manual sharpening.
  • Right-hand spiral type N.
  • Cylindrical shank that corresponds to the diameter of the drill.
  • Surface coated with oxide for low friction coefficient and increased drilling performance.
  • Compatible with DIN 1869 II.
  • Intended for laboratory applications for alloy and carbon steel with a strength of up to 900N/mm2, gray and ductile cast iron, sintered iron, non-ferrous metals, and hardened plastics.
  • Recommended cooling media: drilling emulsion, lubricant and cutting oil, ester oil.
  • Using coolant increases the drill's lifespan by 4 times.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Drill Material
HSS

Drill Material

HSS
It is made of steel, which is suitable for high-speed work. It is intended for drilling holes in common steel, iron, and non-ferrous metals.
Drill Bit Coating Material
Diamond
Suitable for
Metal
Drill Top
Cylindrical

Drill Top

Cylindrical
It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
Set with Tips
No
Pieces
1 pcs
Length
375 mm
Diameter
12 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

21,02 €
4,50 €   shipping cost